2010 Shelby GT500
Sale price: $47,500.00
make an offer
Technical specifications
| Manufacturer: | Shelby |
| Model: | GT500 |
| Year: | 2010 |
| Type: | Coupe |
| Fuel Type: | Gasoline |
| Color: | Blue |
| Mileage: | 8,100 |
| Interior Color: | Black |
| Engine: | See description |
| Trim: | See description |
| Number of Cylinders: | 8 |
| Got questions? | Ask the Seller |
Current customer rating:
()
based on 5 votes
()based on 5 votes
Photos
Description
YOU ARE VIEWING A 2010 SHELBY GT 500 WITH OVER 140,000.00 INVESTED IN THE BUILD AND ONLY 8300 MILES.THIS SHELBY IS TUNED AT 800 WHP THE MOTOR IS BUILT FOR OVER 1200 WHP.
THIS CAR HAS BEEN WELL LOOKED AFTER STORED IN CLIMATE CONTROLLED GARAGE,NEVER RACED OR TRACKED DURING MY OWNERSHIP.
AS DETAILED IN THE PICTURES THIS SHELBY IS IN EXCELLENT CONDITION AND THE DASH WAS SIGNED IN PERSON BY THE LEGEND HIMSELF CARROLL SHELBY.
NOTE ALL PHOTOS TAKEN WITH NO PHOTO SHOP OR FILTER USED.
SERIOUS INQUIRIES ONLY PLEASE.I WILL BE OPEN TO CONSIDER A TRADE FOR A EXOTIC CAR OF EQUAL VALUE/RARENESS
CUSTOM BUILT BALANCED AND BLUEPRINTED RACE ENGINE BY L AND M :
Modular Ford 5.4 GT 500 Short block assembly. Steel crank, Manley H-Beam Rods w/2000 bolts, Manley Forged Pistons, Moly Rings, Race Rod
& Main Bearings, Custom ARP main studs for 8 bolt windage tray, Rehoned w/Stress Plate, Align Honed, Balanced, Blueprinted. FRPP Ford GT wet sump block-Special sourcing due to FRPP backorder.
Ferrea Super Alloy exhaust valves
Ferrea Super Alloy intake valves
Ford Modular 7mm valve seal/spring seat
Ford Modular 4V CNC Head,
INDUCTION - SUPERCHARGER:"
-kENNE BELL MAMMOTH 3.6 LITRE LIQUID COOLED SUPERCHARGER
- (RARE)TEXAS MILE COLD AIR INTAKE 5' (SAME INTAKE USED TO SET GT 500 WORLD RECORD)
-KENNE BELL OVAL 168 MM THROTTLE BODY RATED FOR 1200 WHP
-DIABLO SPORT MAFIA
-INNOVATORS WEST 10% UNDER DRIVE PULLEY
-JLT IN LINE SEPERATOR
-ALL GATES RACING MICRO V BELTS SC AND ALTERNATOR
DRIVE TRAIN:
-BUILT TRANSMISSION
-SPEC R PUCK CLUTCH AND FLYWHEEL
-TRANZILLA GEARS
-CUSTOM RACING DRIVE SHAFT
-FORD RACING 3.55 GEARS
-STRANGE DIFFERENTIAL
-STRANGE AXLES.
-STRANGE STUDS
SUSPENSION AND BRAKES:
-EBIACH PRO SERIES DAMPERS FRONT AND REAR
-EIBACH PRO SERIES SWAY BARS FRONT AND REAR.
-FAYS 2 SUSPENSION REAR PRO KIT
-SHELBY 6 PISTON FROM BRAKES WITH SS LINES AND DRILLED AND SLOTTED ROTORS
-SHELBY 6 PISTON REAR BRAKES AND SS LINES AND DRILLED AND SLOTTED ROTORS
-HALF CAGE INSTALLED
-CORBEUA RACING SEATS
-CORBEAU 5 POINT RACING HARNESSES DRIVER AND PASSENGER
-4 WELD RACING ALUMINIUM WHEELS
EXHAUST:
-AMERICAN RACING HEADERS
-SHELBY KR MUFFLERS
-2.5' CUSTOM INTERMEDIATE PIPE
COOLING & FUEL:
-CR RACING RADIATOR
- TWIN RACING RADIATOR FANS
-MOROSO POWER STEERING RESERVOIR
-MOROSO RACING COOLANT RESERVOIR
-MORSO RACING COOLANT EXPANSION TANK.
=RACING 165 DEGREE THERMOSTAT
-KENNE BELL COMPETITION SERIES BOOST A PUMP RATED FOR 850 WHP
-72 LBS INJECTORS
Also published at eBay.ca
THIS CAR HAS BEEN WELL LOOKED AFTER STORED IN CLIMATE CONTROLLED GARAGE,NEVER RACED OR TRACKED DURING MY OWNERSHIP.
AS DETAILED IN THE PICTURES THIS SHELBY IS IN EXCELLENT CONDITION AND THE DASH WAS SIGNED IN PERSON BY THE LEGEND HIMSELF CARROLL SHELBY.
NOTE ALL PHOTOS TAKEN WITH NO PHOTO SHOP OR FILTER USED.
SERIOUS INQUIRIES ONLY PLEASE.I WILL BE OPEN TO CONSIDER A TRADE FOR A EXOTIC CAR OF EQUAL VALUE/RARENESS
CUSTOM BUILT BALANCED AND BLUEPRINTED RACE ENGINE BY L AND M :
Modular Ford 5.4 GT 500 Short block assembly. Steel crank, Manley H-Beam Rods w/2000 bolts, Manley Forged Pistons, Moly Rings, Race Rod
& Main Bearings, Custom ARP main studs for 8 bolt windage tray, Rehoned w/Stress Plate, Align Honed, Balanced, Blueprinted. FRPP Ford GT wet sump block-Special sourcing due to FRPP backorder.
Ferrea Super Alloy exhaust valves
Ferrea Super Alloy intake valves
Ford Modular 7mm valve seal/spring seat
Ford Modular 4V CNC Head,
INDUCTION - SUPERCHARGER:"
-kENNE BELL MAMMOTH 3.6 LITRE LIQUID COOLED SUPERCHARGER
- (RARE)TEXAS MILE COLD AIR INTAKE 5' (SAME INTAKE USED TO SET GT 500 WORLD RECORD)
-KENNE BELL OVAL 168 MM THROTTLE BODY RATED FOR 1200 WHP
-DIABLO SPORT MAFIA
-INNOVATORS WEST 10% UNDER DRIVE PULLEY
-JLT IN LINE SEPERATOR
-ALL GATES RACING MICRO V BELTS SC AND ALTERNATOR
DRIVE TRAIN:
-BUILT TRANSMISSION
-SPEC R PUCK CLUTCH AND FLYWHEEL
-TRANZILLA GEARS
-CUSTOM RACING DRIVE SHAFT
-FORD RACING 3.55 GEARS
-STRANGE DIFFERENTIAL
-STRANGE AXLES.
-STRANGE STUDS
SUSPENSION AND BRAKES:
-EBIACH PRO SERIES DAMPERS FRONT AND REAR
-EIBACH PRO SERIES SWAY BARS FRONT AND REAR.
-FAYS 2 SUSPENSION REAR PRO KIT
-SHELBY 6 PISTON FROM BRAKES WITH SS LINES AND DRILLED AND SLOTTED ROTORS
-SHELBY 6 PISTON REAR BRAKES AND SS LINES AND DRILLED AND SLOTTED ROTORS
-HALF CAGE INSTALLED
-CORBEUA RACING SEATS
-CORBEAU 5 POINT RACING HARNESSES DRIVER AND PASSENGER
-4 WELD RACING ALUMINIUM WHEELS
EXHAUST:
-AMERICAN RACING HEADERS
-SHELBY KR MUFFLERS
-2.5' CUSTOM INTERMEDIATE PIPE
COOLING & FUEL:
-CR RACING RADIATOR
- TWIN RACING RADIATOR FANS
-MOROSO POWER STEERING RESERVOIR
-MOROSO RACING COOLANT RESERVOIR
-MORSO RACING COOLANT EXPANSION TANK.
=RACING 165 DEGREE THERMOSTAT
-KENNE BELL COMPETITION SERIES BOOST A PUMP RATED FOR 850 WHP
-72 LBS INJECTORS
Also published at eBay.ca
