Ford : Mustang SVO

1986 SVO Mustang Rolling Chassis – MINT!!!

Drag Racer Magazine “War Pony” Project Mustang For Sale

This Mustang is currently featured in Drag Racer Magazine as the “War Pony”. This is a multiple part series that documents the build. Absolutely stunning Fox Mustang rolling chassis. Car had 16,059 original Kilometers (9,956 miles) showing on the odometer when the build began and is just as clean underneath as it is on top. 90% of the paint is original (the driver’s door appears to have been painted in the past). Paint, interior, glass and trim is gorgeous. Chassis components are all new and they are the best of the best. Approximately $15,000 in parts (alone) in the build, not including the basic car or outside labour. The Mustang is a perfect bracket car or an ultimate grudge racer. Sold as a rolling chassis – no engine, transmission, driveshaft or third member. Included in the build:
Front End…
Racecraft mild steel (tubular) K-member. Accepts Chevy LS motor, ChevySmall Block, Chevy Big Block or Small Block Ford, Big Block Ford. Racecraft spool mounts for ChevyLS motor included. Mountsetup allows for 1-inch front to back motor adjustment. Racecraft narrowed front a-arms. Mild steel. Narrowed 1-inch (over standardFox). Tucks standard offsetwheels inside wheel well. Delrin bushings. Spicer ball joints.Flaming River Pinto Rack with Racecraft billetclamp.Racecraft Pro style steering shaft. Pro Stockstyle (aircraft) universal joints.Racecraft tapered pin, billet bump steer kit(steering arms). Top qualityFK rod ends. Strange Engineering double adjustable frontstruts. Hypercoil (coil-over)springs.Racecraft caster-camber plates. Bolt in style with sphericalbearing upper mount.Mark Williams modified front spindlesMark Williams 4-piston brake kit. Includes billet hubs & ½-inchstudsRussell braided steel brake hosesRight Stuff custom (shortened) replacement frontbrake hard lines.All fasteners used for assembly are Aircraft AN,Grade 8 or custom zinc plated OEM components Rear End…
TRZ Motorsports sheetmetal 9-inch Ford housing.Folded sheetmetal center section with round tube chrome moly back brace,round tube chrome moly bottom brace, fore and aft braces, milled faceplate, 3-position adjustment upper trailing (control) arm mounts withdoublers, 6-position lower trailing (control) arm mounts with doublers,4-position shock mounts, narrowed 2-inches per side, Mark Williams“standard” housing ends, centered pinion. Beautifully TIG welded piece. Billet filler cap and drain.TRZ Motorsports round tube upper trailing(control) arms with huge ¾-inch 3-piece Aurora Teflon rod ends.TRZ Motorsports round tube lower trailing(control) arms with huge ¾-inch 3-piece Aurora Teflon rod ends.TRZ ARB designed specifically for the Fox bodyMustang included with the car, but not installed. Includes a complete setof high end Aurora 3-piece Teflon rod ends.Strange Engineering double adjustable coil-overshock absorbers. Hypercoilsprings.TRZ Motorsports shock mounts. Mark Williams 35-spline Pro Street axles Mark Williams 5/8-inch Drive StudsMark Williams Pro Street 4-piston rearbrakes. Vented rotors &mechanical park brakes.Russell braided steel brake hoses. Chassis Miscellaneous…
S&W Race Cars round tube frameconnectors. Ties frontk-member to seat mounts to rear lower control arm pocket. Directly reinforces control armpocket. Wild Rides Upper Battle Box Kit (reinforcesupper rear control arm pocket) Maximum Motorsports Manual Brake Adapter Kitwith Manual FoMoCo master cylinder. Billet pushrod with rod end on pedal. Maximum Motorsports custom brake lines (masterto distribution valve)Maximum Motorsports Heavy Duty adjustable brakepedal. Allows pedal face to be adjusted up, down, in or out. Maximum Motorsports Heavy Duty clutch cablesetup. Includes billet pawl, billet aluminum adjuster on firewall (insteadof under the dash) and a heavy duty OEM style cable. Scott Rod Fab aluminum heater delete plate kitAll engine compartment wiring removed and hiddeninside inner fenders and beneath the rad support braces.Florida 5.0 custom dash panel kit with carbonfiber inlay. Includesminiature jewel lamp for line lock or trans brake “on” or what-have-you.SpeedHut Revolution gauge package. High tech step motor gauges. Allwith recall and warning lamp features. Package includes: - 160 MPH Speedometer with high beam and turn signal indicators in face; digital odometer
- 10,000 RPM Tachometer with built in four LED bulb shift light
- 120-260 degrees Water temperature gauge
- 0-100 PSI Oil pressure gauge
- 0-18 Volts Voltmeter
- Fuel level gauge
Wheels & Tires…
15X3.5-inch Champion Billet Speed Series wheels(front), custom built M&H Racemaster P185-75R15 DOT front tires Chrome steel valve stems (front and rear) McGard race car lug nuts (front)15X8.00-inch Champion Billet Speed Series wheels(rear), custom built M&H Racemaster P275-60R15 DOT Drag Radialrear tiresMark Williams lug nuts (rear for 5/8-inch studs)
Additional photos available upon request.

Terms: The Mustang rolling chassis is sold as is with no warranty expressed or implied. Miles are exempt due to the vehicle age. $1000 deposit due within 2 business days of the close of the listing to secure the vehicle. Balance due within 7 days. Payment Options include: Cash (In Person), Verifiable Bank Draft, or Bank-To-Bank Transfer. PayPal not accepted for payment of balance. All funds must be free and clear before delivery/release of the vehicle. The Mustang is advertised locally and as a result, the listing may be ended early.


Also published at eBay.ca