Können Sie ein Auto mit Sprühdosen streichen? Ja natürlich . Sprühfarbe ist eine dominierende Tendenz, die die Aufmerksamkeit von Automobilliebhabern auf sich zieht.

Vielleicht, weil diese innovative Methode eine breite Palette von Annehmlichkeiten bietet und Ihnen ein Gefühl der Aufregung und der freien Schöpfung vermittelt.

Eine Lackierung erfordert jedoch mehrere spezielle Erkenntnisse, insbesondere in Bezug auf die Anzahl der Dosen Sprühfarbe, um ein Auto zu malen.

Außerdem sind die Werkzeuge und der richtige Sprühstil entscheidend, um ein Auto mit Sprühdosen zu malen.

Sie haben auf den richtigen Artikel geklickt, um alle verwandten Dinge über das Sprühen des Autos zu entdecken. Besuchen Sie uns jetzt, um Ihr Problem zu lösen!

Spray Can - eine helle Idee, ein Auto zu malen

Daher wollen wir Sie über eine Sache unten informieren.

Vermeiden Sie es, zwischen Automobilfarbe und Hausfarbe zu fehlerhaft. Sie unterscheiden sich bemerkenswert in Qualität und Funktion. Wenn Sie die falsche Farbe auf Ihr Fahrzeug anwenden, können die Ergebnisse wirklich schrecklich werden.

Wie viele Dosen Sprühfarbe, um ein Auto zu malen?

Betrachten Sie zunächst die Spray -Marke, die eine andere dicke Formel bietet. Zweitens entscheiden Sie sich für die beabsichtigten Schichten von Mänteln.

Für ein optimiertes Ergebnis sind 2-3 Farbschichten eine ideale Wahl. Dann plus weitere vier Dosen für Ihren Stoßfänger . Damit benötigen Sie 20 Rasseldosen oder mehr .

Diese Anforderungen sind in Abhängigkeit von verschiedenen Arten von Fahrzeugen äußerst wichtig. Es würde sich also helfen, wenn Sie überlegen, was Ihrem Fahrzeug am besten passt, wie z. B. Modell, Farbe oder Sonne.

Angenommen, Sie leisten nicht die ganze Reihe von Dosen. Fühlen Sie sich frei, die Anzahl auf 10 zu senken.

Denken Sie jedoch daran, dass Sie das bekommen, was Sie bezahlen. Ausreichende Mäntel ermöglichen es der Farbe, fester zu bleiben und ihre Langlebigkeit zu verlängern.

Wie male ich ein Auto mit Sprühdosen?

rubbing compound , hand sandpaper (120 up to 1500 grit), primer, masking film, lacquer thinner - also used to clean the catalytic converter , cleat, coat, body filler, rust-oleum enamel, mineral spirit, acetone, tack cloth, and of course spray paints.

Scrape Off The Current Paint

Before this task, remember to put on protective gears such as glasses and masks.

Start sanding off the paint strongly until you see the bare metal. The ultimate tip is to follow the circular motion to sand down all paint quickly.

Next, detach the damaged surface like rust using sandpaper of 180 grit. Then use 400 or 600 grit paper to let the paint surface be available.

Mend The Dented Area

Apply the dented area with prepared body filler and hardener. Never stir the mixture, or you will encounter a bubbling hole on the surface.

It would be best to wait until the mix hardened before sanding it down.

Clean The Surface

Use mineral spirit to clean all the painted surfaces. This important step will detach the oil residue for better performance.

Cover The Unpainted Area

Cover the unpainted area using the masking tape and masking film. The window trip, for example, along with mirrors or grills.

Mist The Primer

Then, use the sand to detach the primer with sandpaper of 1200 grit.

Apply On The Paint

Before any usage, please read the directions clearly. Shake the rattle cans softly to increase the inside pressure.

Then, rotate it to the side, adjust the paint gun and begin spraying with an even side-to-side motion

Normally, you paint the first two coats in a few hours. Until they have dried, keep sanding and prepare to apply the last coat.

Apply The Clear Outer Coat

After that, spray on the last lacquer layer. Now you may take out the masking tape and wait until the cleat coat has dried completely.

Polish The Whole Post Surface

The total spraying and drying time of color coats takes at least 30 minutes. Abhängig von verschiedenen Farbtypen kann es bis zu einem ganzen Tag dauern.

Stellen Sie außerdem sicher, dass Sie einige klare Nachbesserungen durchführen, bevor Sie den letzten klaren Mantel malen.

FAQs

The paint needed is quite generous for a large vehicle like a truck. 6 to 7 quarts of paint would be enough. If you are a newbie, you need a little more paint for two primer coats.

How To Paint A Hood With A Spray Can?

First, put a thin primer layer on the hood. We hold the canister vertically above the hood. Then, rotate it to the side, point the spray gun at the hood, and start spray-painting.

Apply the same process on the reverse side. Repeat until you finish the entire hood.

Endeffekt

As you see, it is predictable to know how many cans of spray paint to paint a car. All you need to do is to consider and estimate an approximate amount of rattle cans for your motor friend.

Now, lets run to the nearby garage and purchase a sufficient amount of paint and get down to your business.