Qu'on le veuille ou non, comment désactiver l'alarme de la ceinture de sécurité Toyota Highlander 2021 doit être parmi les nuisances courantes que plusieurs conducteurs ont au moins une fois heurté.

The question is: Is deactivating such a function the right thing to go for, considering its reasons to be on alert? Lets find out with our article below to spot your trouble!

When Do You Allow To Deactivate A Seat Belt Alarm On Toyota Highlander?

What if none of those solutions described above is the gist you wish to find out? In such a case, checking the OCS (Occupant classification) sensor can be your savior to rescue you from that pain in the neck.

Believe it or not, the test will only be beneficial for you and your possible future sale of your Toyota Highlander.

Une fois que vous avez compris que le problème se situe dans le capteur de présence, la réparation des carillon de ceinture de sécurité Toyota Highlander 2019, 2020 et 2021 ou même sur d'autres véhicules Toyota plus récents ne coûteront pas nécessairement beaucoup.

Cats out of the bag: A disconnected wire is frequently the culprit to blame!

How To Turn Off Seatbelt Alarm Toyota Highlander 2021

, and you should not do so anyway.

Step 3: Turn the odometer knob until ODO appears.

Your dash panel has a knob that you may turn to switch between the trip and total odometer readings. As soon as ODO appears on the instrument panel, you can pause turning this knob.

Step 4: Reverse your key off and then turn it on once again.

Step 5: Adjust your seat belt after switching the odometer for 10 to 15 seconds.

Also, do not forget to put your seatbelt on while holding the knob. You can let go of it once the task has been done.

Step 6: Let go of the trip odometer knob after B off appears in your instrument cluster.

On the instrument panel, B OFF should flash by then. This proves that you have just disabled the seat belt alarm successfully.

Conclusion

Above are mostly what you may urge to grasp more on how to turn off seatbelt alarm Toyota Highlander 2021 . Take care of the minor details so you shall not fail to run the repair later on.

Hopefully, this article can be of great help to you somehow.

Stay tuned for our next updates!