After a period of time, having to fix your vehicle engine and other components is unavoidable. One of the most common problems you might face is starter issues.

If you have a defective starter and want to replace a new one, knowing its location is a prerequisite. So where is the starter located in a car?

You might be curious about the location of an entire starter. ¡No hay problema!

This article will discuss this interesting question thoroughly and show more facts about starters. Now lets check it out.

What Is A Starter?

The starter system components include a starting motor, a solenoid, a gear, and a housing, powered by a 12-volt battery.

Because the internal combustion system cannot start by itself, there should be cars using internal combustion engines that are often equipped with an additional starting system.

On an internal combustion engine, the starting system spinning will transmit a torque to the engines crankshaft with a specific number of revolutions to start the engine.

For cars with an auto transmission, only when the car is shifted to N or Park gear can the starter motor work.

On the other hand, you need to press the clutch pedal if you are driving a car with a manual transmission.

Now, where is a starter in a car ?

Where Is The Starter Located In A Car?

.

Not all vehicles starters are placed in the same position. Depending on the vehicle structure, you can find the starter either on the driver or passenger side.

For rear wheel drive (RWD), your cars starter is positioned on the passenger side, near the transmission on the bottom of the engine.

But for front wheel drive (FWD), the starter is on the drivers side of the engine, underneath the cylinders left bank.

There are some bolts that secure and affix it to the mounting plate. Also, you can find two wires that are connected to the starter.

How To Find Car Starter Location?

It contains several cables that link to other cars electrical components and is located near the cylinders edge.

The starter will stand out with its cylindrical shape. It is made up of two cylinders that do not have equal size, one wider than the other.

You should remember that one of them is the solenoid, whereas the remaining one is the starter.

Where Is the Starter Located on Various Vehicle Models?

Now you will see smoke rising from beneath the engine. When you have this problem, you should call a qualified mechanic at once.

How To Install A Car Starter?

Step 6: Insert the starter bolts

Thread each bolt by manually turning it in a clockwise direction to tighten the starter. Then, using a proper socket and wrench, screw them down.

If any bolts remain loose, loosen them and try again. This prevents the bolt from wobbling and free-play when the car is in motion.

Step 7: Connect the wiring

Connect the wire (which you have disconnected from the old one) to the terminals of the new starter once the automobile starter motor is in place.

If youre unsure, consult the handbook and make the proper wiring connections.

Step 8: Reconnect the battery

The final step is to reconnect the battery. Link the black wire to the negative battery terminal.

Then, enter the key into the ignition and attempt to start your vehicle. You know your starting replacement is a success when the engine cranks up smoothly.

Conclusión

Remember to repair your starter problem as soon as you discover the symptoms.