After a period of time, having to fix your vehicle engine and other components is unavoidable. One of the most common problems you might face is starter issues.

If you have a defective starter and want to replace a new one, knowing its location is a prerequisite. So where is the starter located in a car?

You might be curious about the location of an entire starter. Ingen problemer!

This article will discuss this interesting question thoroughly and show more facts about starters. Now lets check it out.

What Is A Starter?

The starter system components include a starting motor, a solenoid, a gear, and a housing, powered by a 12-volt battery.

Da forbrændingssystemet ikke kan starte af sig selv, skal der være biler, der bruger forbrændingsmotorer, der ofte er udstyret med et ekstra startsystem.

På en forbrændingsmotor overfører startsystemet spinding et drejningsmoment til motorens krumtapaksel med et specifikt antal omdrejninger for at starte motoren.

For cars with an auto transmission, only when the car is shifted to N or Park gear can the starter motor work.

On the other hand, you need to press the clutch pedal if you are driving a car with a manual transmission.

Now, where is a starter in a car ?

Where Is The Starter Located In A Car?

.

Not all vehicles starters are placed in the same position. Depending on the vehicle structure, you can find the starter either on the driver or passenger side.

For rear wheel drive (RWD), your cars starter is positioned on the passenger side, near the transmission on the bottom of the engine.

But for front wheel drive (FWD), the starter is on the drivers side of the engine, underneath the cylinders left bank.

There are some bolts that secure and affix it to the mounting plate. Also, you can find two wires that are connected to the starter.

How To Find Car Starter Location?

Det indeholder flere kabler, der forbinder til andre biler elektriske komponenter og er placeret i nærheden af ​​cylindrekanten.

Starteren skiller sig ud med sin cylindriske form. Det består af to cylindre, der ikke har samme størrelse, den ene bredere end den anden.

Du skal huske, at en af ​​dem er magnetventilen, mens den resterende er starteren.

Hvor er starteren placeret på forskellige køretøjsmodeller?

The negative terminal wire is affixed to the starter motor. Its a cylinder 6 inches long, connected to the spinning wheel.

You might need to use a flashlight and automobile jacks. Raising the cars front end provides access to the engines underbelly, where the starter is situated.

Where Is The Starter Located On A Chrysler Cirrus?

Regarding a 2.4-L engine Cirrus, the starter is located below the Transm i ssion Control Module (TCM) , which is a box on the rear side of your engine.

To replace the starter, you must unscrew the TCM and detach the air intake system. The starter is connected to the transaxle by an extra bolt that must be reached from below the car.

With a 2.5-L engine Cirrus, you can easily spot the starter in the vicinity of the oil filter, and it should be accessible from beneath the car.

It is bolted to the transaxle in three places. To replace it, you must first detach the filter and untighten the bolts that connect the manifold and exhaust pipe.

The battery positive terminal is secured in place for both versions using a screw. There is a cable attached to the solenoid through a push-on connection.

Before uninstalling the starter, these should be unplugged. Its important to detach the negative terminal for safety precautions.

What Causes A Defective Starter?

A sign of a relay not working properly is that you will hear a constant clicking sound when pressing the button.

Årsagen er, at sugespolerne strømforsyning er ustabil, når man passerer gennem relæet, hvilket forårsager kontinuerlig suge og frigivelse.

Dette kan føre til gevindglidning og gearbrud, hvilket forringer kvaliteten af ​​tråden.

Batterikorrosion

Forbindelserne fra batteriudløbet og startindgangen er tilbøjelige til korrosion og rust på grund af oxidation, hvilket forårsager dårlig kontakt.

Den nuværende, der leveres til starteren, er ikke nok til, at den kan generere stort drejningsmoment til at skrue op på motoren.

Most of the clamps or the screws that catch these connectors are not copper or aluminum, so they quickly become damaged and rusted, deteriorating the quality of the starting current.

Disse samlinger skal kontrolleres og rengøres regelmæssigt for at sikre god kontakt.

For ikke at nævne, et korroderet batteri kan føre til andre farer .

Symptomer på en dårlig startmotor

Så at søge hjælp fra en bilreparationsfacilitet vil hjælpe dig med at bestemme og korrigere problemet.

Slibende lyd

Hvis gearene på tandhjulet er brudt, hører du muligvis en slibestøj, når du tænder på tændingsnøglen.

Når startkomponenterne slides eller undlader at engagere sig korrekt, produceres en slibestøj, der ligner støjen, efter at motoren er slukket .

Røg

De fleste startere holdes fast af to eller flere hex -nødder. Skru først boltene med stikkontakten i en korrekt størrelse til at installere starteren.

Hvis du ikke bruger den rigtige sokkelstørrelse, vil det forårsage ødelagte bolte.

Når boltene er blevet frigivet, skal du muligvis trække på starteren med en vis kraft for at adskille den fra motoren.

Trin 5: Skub den nye starter på plads

Udskift den friske starter i det nøjagtige monteringspunkt som det foregående. Du skal få adgang til motoren fra enten over eller nedenfor, afhængigt af design af din bil.

For at placere det korrekt, skal du muligvis trække den nye starter ned og omkring andre dele.

Step 6: Insert the starter bolts

Thread each bolt by manually turning it in a clockwise direction to tighten the starter. Then, using a proper socket and wrench, screw them down.

If any bolts remain loose, loosen them and try again. This prevents the bolt from wobbling and free-play when the car is in motion.

Step 7: Connect the wiring

Tilslut ledningen (som du har koblet fra den gamle) til terminalerne i den nye starter, når bilstartermotoren er på plads.

If youre unsure, consult the handbook and make the proper wiring connections.

Step 8: Reconnect the battery

The final step is to reconnect the battery. Link the black wire to the negative battery terminal.

Then, enter the key into the ignition and attempt to start your vehicle. You know your starting replacement is a success when the engine cranks up smoothly.

Konklusion

Where is the starter located in a car? After reading this post, we hope you can find the answer to this question.

A starter plays a vital role in operating the car. Imidlertid kan den originale starter gå dårligt af mange grunde, såsom defekte batterikabler, funktionsdygtig relæ eller defekt sikring.

Derfor kan det at kende starterens placering hjælpe dig med at udskifte en ny hjemme uden at kontakte nogen erfaren mekaniker.

Forhåbentlig med ovenstående oplysninger har du fået mere nyttig viden og erfaring i bilindustrien.

Husk at reparere dit startproblem, så snart du opdager symptomerne.