EZ Pass Windschutzscheibenpunkte sind an den meisten Windschutzscheiben von Autos montiert. Unter ihnen erscheinen viele schwarze Punkte am Rand der Windschutzscheibe.

Zusätzlich ist ein EZ -Pass, der in der Nähe des Rückspiegels befestigt ist, spürbar. What do these do? Scrollen Sie nach unten, um weitere Details zu erhalten.

What Are EZ Pass Windshield Dots?

.

After getting E-ZPASS in New York oder die verbleibenden 16 Staaten, E-ZPASS, sendet Mautdaten vom Sender über das Scip-Scannen an das Hauptcomputersystem, wenn Sie die Mautspur durchführen.

Then itll deduct the toll amount from your credit or bank account.

Explanation of E-ZPass and Windshield Dots

Windschutzscheibenpunkte, auch als Frits bekannt, sind mit den großen Punkten in der Oberkantezone ausgelegt und verringern sich, wenn sie sich in Richtung Außenbewegung bewegt.

It helps to relieve pressure caused by high or low temperatures.

Die Expansion des Glass, wenn es zu heiß ist und die Kontraktion des Glass, wenn es zu kalt ist, wird von diesen schwarzen Punkten ausgeglichen und kontrolliert.

So you can see that there is no relation between these black dots and the E-ZPass tag, considering their distinct purposes.

But people call them the E-ZPass windshield dots maybe because this zone is where drivers usually attach their E-ZPass tags.

How To Install EZ Pass?

It is a direction sign so the driver can stick the correct position on the windscreen.

Anschließend können Sie das Etikett in der oberen Mitte des Glass hinter dem Rückspiegel, ungefähr 1 Zoll zur rechten Seite der Rückseite und etwa 1 Zoll unter dem oberen Rand der Windschutzscheibe, platzieren.

If the window in the car is shaded, you need to ensure that the equipment is placed at least 1 inch below the shaded area.

2. Roof Mount

You can also stick the tag on the roof mount of the car. Some installation notes include the sticks position at least 3 inches from the cars roof.

Also, you shouldnt install it near radio antennas as it will interfere with the toll collection device when scanning the chip.

There are 4 adhesive strips on the E-ZPass tag. 2 are mounted on the tag, and the remaining strips are attached to the windshield.

Nachdem Sie die schützenden Rückschläge aus dem Klebstreifen entfernt haben, sollten Sie sie an Ort und Stelle halten und etwa 15 bis 30 Sekunden lang festhalten, um sicherzustellen, dass das Tag fest an der Windschutzscheibe festgehalten wird.

To keep the transponder on the windshield for a long time, you shouldnt remove them and re-glue them many times.

It will lose the adhesive over time and cause the tag to come off the windshield quickly.

3. License Plate Mount

The license plate mount is also a convenient location to equip the E-ZPass.

However, in addition to sticking the tag with glue as on the windscreen, you should use bolts to fix it on the license plate holder.

It helps the tag to be more firmly fixed and makes it difficult to fall off during driving, especially on bumpy roads.

In addition, after a period of exposure to smoke and dust, the adhesive will disappear and cause the transponder to fall off the vehicle.

Thus, you should use bolts to secure it right to the license plate. It is best to place it in the center of the front bumper to avoid the tag covering your license plate information.

How To Put EZ Pass On Windshield?

One of the most important steps when installing the EZ-Pass is cleaning the windshield.

The glass full of dirt or water will make the transponder stick better and have a longer life when sticking to the windshield.

Wenn Sie die Autos ohne Behandlung nass lassen, maskiert Frost die Innenseite der Windschutzscheibe und verhindert die Haftung des Etiketts am Glas.

Identifying the front and back of the tag is easier because the manufacturer already has markings for the strips attached to the tag.

Sie sollten keine Bänder verschiedener Typen verwenden als die vom Hersteller bereitgestellten Typen, da dies verhindern kann, dass das Tag lange Zeit auf der Windschutzscheibe haftet.

FAQs

Besides, the battery can have problems when the vehicles glass temperature is too high due to prolonged exposure to the sun.

If this error is repeated many times, you should have a new E-ZPass transponder.

Another reason the EZ Pass doesnt receive a signal at the toll station is frost on the windshield. Its best to put a towel on the windshield to prevent frost when you leave your car outdoors and dont use it.

Abschluss

Overall, EZ Pass windshield dots are used to distribute heat evenly on the windshield to help prevent glass breakage.

Meanwhile, the EZ Pass tag or transponder is installed as an electronic toll collection device, so they are worlds apart.

Wir hoffen, dieser Artikel ist für Sie nützlich. Thank you for your time, and see you in the next posts.