Keyless sytytys on saanut valtavan maineen kuljettajien keskuudessa sen nykyaikaisuuden ja mukavuuden ansiosta. Jotkut ihmiset kuitenkin mieluummin klassista mallia, joka hyödyntää avaimetonta järjestelmää.

Monet heistä ihmettelevät: Voitko korvata painikkeen käynnistyksen avaimella? Tämä on melko kamppaileva kysyntä, ja yleensä on mahdotonta toteuttaa tällaista monimutkaista tehtävää.

In this article, we will give out a detailed explanation of the principle of this item and why we could not replace it with a key.

Can You Replace Push Button Start With Key?

It is impossible to replace the push button with a key in modern vehicles .

In case you are really eager to do it, you will have to pay a large amount of money that is nearly equivalent with the cost of a new car to get the process done.

However, you can easily change from key to push start button for a fraction of that fee .

When it comes to converting automotive items, the mechanical technique is the first one to be considered.

With the inclination of the push-button start system, key-starting cars are no longer a prioritized option for drivers.

Switching from a keyless ignition to a physical key requires complicated mechanical techniques.

Therefore, it will be hard to look out for a mechanic that is professional in doing such paradoxical tasks.

How To Choose The Compatible Push Start?

, it is vital that you pick up a compatible keyless system for remote entry .

Since each vehicle is operated by a different type of ignition, you had better take it to garages or automotive shops to get instructions.

If you choose the button randomly, your vehicle will likely be ruined in a short term. Here are several things you should take into consideration:

  • Operating range: Given that every automatic start goes with a remote, you should also determine the specific active range of the remote. It will decide on the distance that you start your engine.
  • Cutoff switch: For your cars security, checking for the manual cutoff switch is necessary as it enables you to lock the engine at a distance.
  • The number of key fobs: Normally, the kit will have one fob; however, you will want to install it with more than one. Each key fob will represent one function. Also, these back-ups will be your lifesaver when you unfortunately drop the car key and dont know how to start the car without a chip key .

How To Install Push Start?

  • Step 3: After the voltage is checked, you mark the important wires needed to be connected to the button. It is advisable that you utilize the wiring diagram of your car.
  • Step 4: To keep you safe during the installation, we recommend you disconnect the electricity lines with a wrench.
  • Step 5: Attach the button to the right place.
  • Step 6: Connect the button with the corresponding ignition wires based on the instructions.
  • Step 7: Connect it with the brake wire and the antenna so it can receive the signals from a far distance.
  • Step 8: After the process is done, recheck the ignition systems operation to ensure it is still active.
  • Step 9: Close the steering cover and try out the new item.

    • Note: Since the installation requires a high accuracy level, you must do it step by step carefully. If you dont feel confident when implementing this process, you should take it to a professional mechanic.

    Besides, these steps are not utilized in every type of car; therefore, observe before making a decision.

    Faqit

    Reduce accidents: Since the car can only run when you push the brake pedal and press the button, it is much easier to control the car while driving.

    How Much Does It Cost To Convert Car To Push Button Start?

    In terms of technical cost, the price range will vary depending on each type of button kit and whether you do it yourself or not.

    On average, a button kit ranges from $25 to $150 ; the price could also be different for each type of transportation. Its advisable to buy it at an automotive shop or directly from your initial garage.

    If you are a professional in fixing and can DIY, you only have to pay for the kits.

    However, when you are new to these complex technical tools, youre better off taking it to a mechanic. The labor cost for button replacement is $100, depending on each shop.

    How To Use The Push Start?

    You can do the installation yourself or take it to a garage. In principle, the auto button outweighs the traditional key because it is more secure and convenient.

    If you find this information beneficial, please leave your comment below!