Keyless ignition is gaining an enormous reputation among drivers thanks to its modernity and convenience. However, some people still prefer the classical model that utilizes the keyless system.

Many of them wonder: Can you replace push button start with key? This is quite a struggling demand, and in general, it is impossible to implement such a complicated task.

In this article, we will give out a detailed explanation of the principle of this item and why we could not replace it with a key.

Can You Replace Push Button Start With Key?

Therefore, it will be hard to look out for a mechanic that is professional in doing such paradoxical tasks.

How To Choose The Compatible Push Start?

Before changing key ignition to push button , it is vital that you pick up a compatible keyless system for remote entry .

Since each vehicle is operated by a different type of ignition, you had better take it to garages or automotive shops to get instructions.

If you choose the button randomly, your vehicle will likely be ruined in a short term. Here are several things you should take into consideration:

  • Operating range: Given that every automatic start goes with a remote, you should also determine the specific active range of the remote. It will decide on the distance that you start your engine.
  • Cutoff switch: For your cars security, checking for the manual cutoff switch is necessary as it enables you to lock the engine at a distance.
  • The number of key fobs: Normally, the kit will have one fob; however, you will want to install it with more than one. Each key fob will represent one function. Also, these back-ups will be your lifesaver when you unfortunately drop the car key and dont know how to start the car without a chip key .

How To Install Push Start?

  • Step 1: Remove the steering wheel cover
  • Step 2: Check the voltage using a multimeter , and place the right pin on the harness and the other pin on the grounding point.
  • Step 3: After the voltage is checked, you mark the important wires needed to be connected to the button. It is advisable that you utilize the wiring diagram of your car.
  • Step 4: To keep you safe during the installation, we recommend you disconnect the electricity lines with a wrench.
  • चरण 5: बटन को सही जगह पर संलग्न करें।
  • चरण 6: निर्देशों के आधार पर बटन को संबंधित इग्निशन तारों के साथ कनेक्ट करें।
  • चरण 7: इसे ब्रेक वायर और एंटीना के साथ कनेक्ट करें ताकि यह सिग्नल को दूर की दूरी से प्राप्त कर सके।
  • चरण 8: प्रक्रिया होने के बाद, यह सुनिश्चित करने के लिए इग्निशन सिस्टम ऑपरेशन को फिर से शुरू करें कि यह अभी भी सक्रिय है।
  • चरण 9: स्टीयरिंग कवर बंद करें और नए आइटम को आज़माएं।

नोट: चूंकि इंस्टॉलेशन को उच्च सटीकता स्तर की आवश्यकता होती है, इसलिए आपको इसे सावधानी से कदम से कदम उठाना होगा। यदि आप इस प्रक्रिया को लागू करते समय आश्वस्त महसूस नहीं करते हैं, तो आपको इसे एक पेशेवर मैकेनिक में ले जाना चाहिए।

इसके अलावा, इन चरणों का उपयोग हर प्रकार की कार में नहीं किया जाता है; इसलिए, निर्णय लेने से पहले निरीक्षण करें।

पूछे जाने वाले प्रश्न

Key And Push Button Start: Which One Is Better?

In general, the push button is more dominant than key ignition due to its outstanding features:

Desist from theft: With auto button kits, you can reduce the risk of getting burglars since the car can only be opened by the key fobs.

Convenience: Some up-to-date car versions are installed with button kits that alert the drivers when they forget their fobs inside the car. This can reduce the risk of locking the car by yourself.

Reduce accidents: Since the car can only run when you push the brake pedal and press the button, it is much easier to control the car while driving.

How Much Does It Cost To Convert Car To Push Button Start?

In terms of technical cost, the price range will vary depending on each type of button kit and whether you do it yourself or not.

On average, a button kit ranges from $25 to $150 ; the price could also be different for each type of transportation. Its advisable to buy it at an automotive shop or directly from your initial garage.

If you are a professional in fixing and can DIY, you only have to pay for the kits.

However, when you are new to these complex technical tools, youre better off taking it to a mechanic. The labor cost for button replacement is $100, depending on each shop.

How To Use The Push Start?

Getting accustomed to this modern item is not too difficult once you read the instructions.

Firstly, you press the unlock icon on the key fob to open the car. Once you get in the car, you push the brake and the push-button ignition at the same time and keep it until the engine turns on.

There are, of course, times when the key fob cant unlock your car , but fixing it is not much of a concern.

निष्कर्ष

In conclusion, can you replace push button start with key?

It is impossible to switch from push button to key ignition due to the complexity and hefty expense of the task. Nevertheless, you can turn your conventional car into an auto-button vehicle.

You can do the installation yourself or take it to a garage. In principle, the auto button outweighs the traditional key because it is more secure and convenient.

If you find this information beneficial, please leave your comment below!