Surely all of us - vehicle owners know how important the seat belt is . Although some people tend to ignore it, this part will be really useful when it comes to protecting you from injury in collisions.

Whether you can use it or not, always double-check each time you get in the car and make sure it can still work properly.

But unfortunately, it got stuck. Wat moeten we doen? How to fix a locked seatbelt ? Well reveal it to you!

How Does Seatbelt Work?

Onjuiste installatie

When you install it incorrectly, it will have a self-locking mechanism. Because when it shrinks too much, it will get stuck, so people also call this reverse lock.

Bad Retractor

Your belts can be jamming due to poor or malfunctioning retractor mechanisms. You have three options in such a case: buy a brand-new seat belt, get a used one, or turn your present one back to factory standards.

Now, its time to learn how to fix a stuck seatbelt !

How To Fix A Locked Seatbelt?

Let op de grootte van de riemen en de manier waarop het hangt. Uw probleem is opgelost als het snel terugkeert naar de oorspronkelijke locatie.

Je kunt een serieuzer probleem hebben als je ziet dat het niet volledig kan intrekken en losjes hangt.

2. Verwikkelde veiligheidsgordel

Maak het schoon

Zoals hierboven vermeld, zorgt er ook voor dat de veiligheidsgordels vast komen te zitten. Naast het schoonmaken van de auto heeft dit deel ook aandacht nodig.

Het is mogelijk dat vuil niet de belangrijkste oorzaak is van deze insluiting. Wanneer u dit onderdeel echter hebt verwijderd, profiteert u er echter van om het schoon te maken om te voorkomen dat u in de toekomst een blokkering veroorzaakt.

Doe de riem in een emmer warm water met wat wasmiddel opgelost en laat het een tijdje weken, van 15 minuten tot 30 minuten.

De riem moet dan worden overgebracht van de emmer naar de handdoek, die op de stoel is geplaatst.

Indien mogelijk kunt u meer interne reinigingsmethoden toepassen of de speciale wasmiddelen gebruiken. Je moet de riem met de handdoek drogen en hem vervolgens volledig laten drogen.

Controleer nog eens

Dat is alles voor het loslaten van een veiligheidsgordel die is vergrendeld vanwege de verwarde. Controleer het steeds opnieuw totdat het goed en soepel werkt.

3. STUCK MECHANISME

Find the little, locked compartment with the button that opens the trunk on the floor of your automobile, close to the center pillar.

Pull The Sid Panel Out

Sit in the cars back seat. Use a flat screwdriver to separate the side panel (the interior B-pillar of your car) if it appears to be tightly fastened to the vehicle.

Alternatively, you can use your hands to pull it away. Since no screws are holding the side panel to the car at this time, you shouldnt be experiencing any problems.

Bring Out The Mechanism

Bolts are used to fasten the retractor mechanism firmly. To unscrew them, you need keys of the right size. These typically come in 10mm and 14mm sizes.

Make sure to remove the clasp that holds the mechanism together as well. You can do this using your fingertips.

Now you can see a plastic cover; flip the item over. It is firmly fastened down with some tiny pins. You need to remove them, and any technique will do.

On the other side of the mechanism, there should be a small box with tiny clips. Use a flat object to loosen them.

Open And Remove The Plastic Pieces

There are two additional, smaller plastic components underneath the large cover. It would be better to take them out because they are lying on the equipment.

There should also be a spring on top of the second component. Eliminate that as well.

Deal With The Gear Wheel

Then use your fingers to turn the gear wheel in a clockwise direction. This action will clear the jam.

By tugging the belt, see whether you can easily rotate the gear. If everything is in working order, its time you need to reassemble the mechanism.

Reassemble And Test The Mechanism

The spring and smaller plastic components should be reattached. Then put the large plastic lid on top of them. Put the pins back inside the little box after securing it with the clips.

Back on the pillar, secure the bolts above and below the seat belt mechanism. Reattach the tiny device with a clip. After that, replace each panel where you originally removed it.

FAQ's

Is It Possible To Replace The Seat Belt Buckle?

Ja. The parts that make up the seatbelt are usually separate and interchangeable.

You should purchase a replacement buckle from the dealer or manufacturer. Before using that seatbelt again, ensure the new buckle is installed correctly and functions as it should.

How Long Will It Take To Replace A Seatbelt?

Replacing a complete seatbelt should require no more than 30 to 60 minutes.

The mechanics ability and speed determine whether this time is faster or slower.

How Much Does It Cost To Repair A Seatbelt?

This will call for about $200 plus labor cost if the pre-tensioner is damaged.

It can require up to $250 to replace a seatbelt. Depending on the damage, repairing a seatbelt might get more expensive.

Its advisable to contact the mechanics or service center directly to know the exact price for your situation.

Laatste gedachten

Above is all the necessary information you should get to learn how to fix a locked seatbelt . Obviously, this task isnt as hard as we thought; it can be solved in 30 to 60 minutes.

To fix it, follow suit with our instructions step by step.

If your seatbelt issue is more severe, you might need to replace it or seek the assistance of a qualified mechanic.