Dopo che la tendenza degli adesivi di decalcomania attira gli occhi in alcuni aspetti, sei ansioso di provarli sul veicolo contemporaneamente.

Ma non fare mai il processo di attacco con noncuranza. Il consiglio sarebbe di seguire il metodo passo-passo seguente per un risultato efficace:

1. Pulisci la superficie

Dopo aver deciso esattamente dove posizionare l'adesivo di decalcomania, iniziare il primo passaggio cruciale: pulire la superficie. Preparare uno spray per detersivo per auto, un panno per la pulizia e una miscela di alcol di sfregamento al 50% e acqua piana al 50%.

Dont worry about the rubbing alcohol, which will not damage car paint or leave any waxy residue to mitigate the adhesive of the fake taxi sticker.

Ricorda di pulire un'area più grande della dimensione dell'adesivo applicata. In questo modo crea più spazio che consente la posizione più precisa in base al tuo desiderio.

Questo passaggio elimina anche i possibili urti strani o in rovina dopo aver applicato l'adesivo di decalcomania. Quindi assicurati di iniziare bene.

2. Posizionare l'area appiccicosa

Il nostro consiglio utile è quello di mettere il falso adesivo di taxi sullo spazio macinato e immaginare come andrà a finire.

In questo modo, puoi prevedere diversi risultati senza la probabilità di danneggiare il sostegno protettivo degli adesivi.

3. Attaccalo con cura

Ora è il momento di testare l'incollaggio del tuo dita agile. In anticipo, correggi la decalcomania usando il nastro adesivo come cerniera, che non attiverà la vernice dell'auto che si spegne.

Usa un flacone spray per inumidire dove applichi l' adesivo per paraurti di taxi finto. A mixture including 95% clean water and just 5% soap will get the job done right.

Quindi, usa le ancore per tenere l'adesivo in posizione. Start slowly peeling the fake taxi decals backing from the edge bottom and avoid touching the adhesive exposure.

Spray soapy water on the adhesive and use your thumb to press and thoroughly smooth from the center to push the messy-looking bubbles out to the edges.

4. Smooth Out Floating Bubbles

As we take advantage of the soapy water to adhere to the fake taxi sticker, it may lead to floating messy bubbles or irritating wrinkles.

The best deal would be the squeegee which will smooth out any obstacles like bumps or a series of tiny bubbles.

5. Take Off The Transfer Tape

Instead, please leave it in place for several hours or a half day for the maximum adherence possible.

Ensure the sticker glues strongly to your vehicle before taking off the transfer tape. And you are good to go at this point. Take a full look at your outcomes and prepare to show off the hot online trend.

How To Get Rid Of Fake Taxi Decals

Once the glue absorbs all the moisture, start peeling. You can use the plastic card, scraper, or even your fingers to clear the residual sticker.

That adhesive area on the car window may turn out stubborn and annoying. So it would help if you treat it like the way you remove 3M tape .

Use Specialized Window Cleaner

Another effective way to remove fake taxi decals is the window cleaner , a ready mix.

Spray the liquid on the removing sticker space and wait for several minutes. You can easily rip it off when the sticker has absorbed the moisture and become soft.

As usual, scrape a sticker out the window with a plastic scraper or bare fingers. Remember to clean gently to protect your windshield from damage.

Then, take a towel to wipe the glass to make it dry and look clean.

Use Rubbing Alcohol

Rubbing alcohol is also proficient in scraping off fake taxi stickers. Pour some rubbing alcohol on a dry soft towel.

Next, gently wipe the sticker area with that towel. Once fully soaked, the sticker becomes soft and bubbling.

Next, similar to the above method, you use a plastic scraper or plastic card to fully clean that surface. Take another towel filled with alcohol to scrape the leftover if there remain stains.

Use Adhesive Cleaner

Take an adhesive cleaner bottle and spray it on the sticker area. As usual, leave the sticker soaked properly for a moment. Then use a plastic card to scrape away the sticker entirely.

During the removal, scrape carefully to avoid harming the glass surface.

If residues are left, turn to a window-cleaning detergent to wipe them off so that the window can look as bright as in the first place.

In breve

Until these lines, we bet the information above has helped you understand clearly about fake taxi window sticker meaning.

The window decal stems from a funny video about a man pretending to be a taxi driver to attract a girl.

This new trend appears to become very attractive and hilarious. If you desire to apply this decal on your vehicle, do not hesitate to do so immediately.

Lets purchase a suitable fake taxi sticker model and follow the application method.

Then, hit the road and show off your personalized style.