1967 BMW 2000CS Alpina Vintage Race Car Monterey Historics SOVREN Motorsport

1967 BMW 2000CS ALPINA VINTAGE RACE CAR
This truly extraordinary, one-of-a-kind, no expense spared, hand-built, 1967 Alpina BMW 2000CS vintage race car was often the most talked about car on the track as it campaigned successfully at the Monterey Historics, and other vintage races across the Pacific Northwest from 2007 to 2011. This car was restored, prepared, and maintained by the vintage race specialists at Racecraft in Woodinville, WA, who are widely lauded for their attention to detail and craftsmanship. Over $200,000 was invested in the development of this vintage racer and its SOVREN Vintage Motorsport Logbook Number 1111 fully documents its 18 racing event history.
The BMW 2000CS is the little-known grandfather of all modern BMW coupes, pioneering many of the design elements seen in BMW cars through the present day. The striking wraparound headlight and tail light assemblies, sleek roofline, famous Hofmeister Kink, and other design elements have proven to be timeless - the use of a single flush headlight wraparound glass enclosing high and low beam reflectors (while originally criticized by the American press) proved to become integral to all BMWs today. Also noteworthy is that Alpina selected the BMW 2000CS as one of its first tuning projects - AT 2000 CS - the first according to some accounts.
This truly remarkable vintage racing BMW - perhaps one of the most remarkable ever offered for sale on eBay - is one-of-a-kind, and one of the most unique BMWs in the world. It will compliment any collection - manufacturer, tuner, and private alike, and will certainly appreciate in value as the 2000CS eventually claims its rightful place in automotive history as the car that led BMW down the road toward its legendary status as The Ultimate Driving Machine. The car has a fresh 200HP Terry Tinney motor with less than 100 miles, and is in excellent condition. Click the links below for articles, videos, and a slide show of the car build:
Flickr Racecraft Build Slide Show by Jim Froula
The following is a listing of modifications made while building the car into a vintage race car:

Electrical System
- There is a panel mounted under the stock heater controls on the dash, this panel has a row of circuit breakers that protect everything in the electrical system. There are no fuses, these breakers can be tripped manually by pulling the button and reset from a tripped position by pushing them.
Rear suspension
- The rear brakes have been converted to 320i backing plates, shoes, drums, etc.
- The rear axles and CV joints are a combination of 2002 and 320i units to get the length just right.
- The rear cross member has been modified to mount a 2002/320i rear diff assembly, the unit in the car is a limited slip 3.9 ratio.
- The trailing arm mounting points are custom made to allow for caster and camber adjustments
- The upper rear spring mount have been removed and threaded collars have been added with rear spring adjuster cups for ride height adjustments. The mounts are tied into the roll cage.
- The shocks are Bilstein sports, non-adjustable
Front suspension
- The front struts are the original ones from the car cut down for Bilstein sport inserts, coil-over adjustable spring perches and camber plates have been added. The front brake calipers are from a ’92-’94 Toyota 4-Runner with custom made 2 piece front rotor and hat assemblies. The hubs and bearings are stock.
Transmission
- The trans is a Getrag 245 close ratio unit with a “dog-leg” first gear and 1:1 ratio 5th gear.
- There is a custom transmission mount
- The flywheel is a JB Racing aluminum unit with uprated E30 M3 clutch.
- There is a Tilton internal slave cylinder that operates the clutch.
- The driveshaft is custom made to the correct length and to mate the close ratio transmission to the 320i rear diff.
General Items
- Ron Davis aluminum radiator
- MSD distributor and street fire ignition
- Canton remote oil filter
- Earl’s oil cooler
- Modified 2002 Stahl header
- Fuel Safe fuel cell (2005)
- Sparco driver’s seat
- Sabelt harness
- SPA dash gauges
- 14x7” 3 piece Kodiak wheels
- Toyo R-888 tires 205-50-14
- Momo Prototipo steering wheel
- Pheonix Halon fire system
- Odyssey battery
- Carter electric fuel pump
- Filter King regulator/filter
- Acrylic windshield, side quarter windows and rear window
- Custom aluminum door panels, dash panel, etc.
- Custom made fiberglass front and rear bumpers
- Fully powder coated underbody, engine bay, interior, and trunk (all non-painted body components are powder coated)
This car is being offered for sale through multiple channels and the seller reserves the right to end the auction early. Serious bidders only - bids by bidders with low or zero feedback may be rejected by the seller. Seller will work with international buyer's shipping agent of their choice - shipping is at buyer expense and risk. Thank you for reviewing this extraordinary, one-of-a-kind, hand-build 1967 Alpina BMW 2000CS vintage racer. Good luck bidders!

Also published at eBay.com