1957 Chevrolet Bel Air/150/210

Less than 500 miles on resto-mod build! Thousands upon thousands, then thousands more invested, plus over 160 shop hours into this build. Why try to duplicate this when all the HARD WORK is DONE!
This is a 99.999% complete car! (only parts missing that I can figure, are the rear seal plate trim to hold the carpet down).
NONE of the original wiring was cut, pulled back, stripped, etc. It's all there!
This is a mild street, but "drive it anywhere" build. Can be a daily driver, cruiser, or extremely solid base for total restoration!
I've sold dozens of vehicles on here and maintain a perfect seller rating doing so - please do NOT hesitate to contact me regarding questions, additional photos, etc. I need you to be happy with your purchase!
DETAILS (not all, too much to list)
MOTOR
350 block, dipped, fluxed, directional bored then honeddrilled oil passages, new freeze plugs
polished crankall bearings are newmoly ringsmelling oil pumpcrane double rollercustom cam by summitcrane hydraulic flat tappet lifterscrane 8.1 push rodsstamped steal 1.5 rockersAluminum heads, 190cc runners, 64cc chambers, 2.02/1.6 valves.600 lift springs Screw in StudsGuide Plates
Accell shorty plugsLong tube headers with Purple Horny PacksWeiand xcelerator single planeEdelbrock 600 electric choke - tunedHEI conversion with hot shot coilAluminum Radiator16" electric fan with auto on/auto offAll new hoses, filters, hardware, clamps, etcNew battery and cablesHigh volume water pumpChrome 110amp alternator (converted to single wire internal regulator)
TRANSMISSION
Aluminum 2 speed powerglideBuilt to handle 600HP (built by semi-pro Wissota Stock Car Racer)
Forward Manual shiftLokar shift conversionCustom cross member2,200rpm stall converterNew flex plateCustom built and balance drive shaftNew Yukon U-jointsCHASSIS
Disc Brake conversion with boosternew rear shocksnew axle sealsnew front wheel bearingsnew front shocksall new steel brake linesnew 2" drop coils in frontnew fuel tanknew fuel tank sending unitnew fuel linesnew TiresCustom powder coated then painted wheelsGauges and TachAll the glass is perfect. I put a new front driverside window in.
All the trim is in great shape with exception of the bumpers.
There's a ton of other new parts and little details that you just have to see in person.
I started replacing the body mounts, but it needs finished. Brand new Poly mounts included, and boxes of original parts that complete the car.
You are responsible or shipping or picking up. I will help load on carrier etc. I can hold the vehicle for a short time, it stays garaged in climate control. I may deliver in the state of Minnesota. No warranty on vehicle.
Text, call, or email Derek 651-894-3826, [email protected]

Also published at eBay.com