1993 Chevrolet Camaro Z28 - ProStreet - ProCharged

Chevrolet ProStreet - ProCharged - ProBuilt - Z28 Camaro. Body:
· Front endupdated with new '98-'02 style GM fenders, bumper, fog lights & AmericanSports Car Designs brand bolt-on fiberglass cowl induction hood in 2001.
o Original cowlscoop replaced with custom '67 427 Corvette style "stinger" hoodscoop.
· Rearquarter panel / bumper wheel well openings stretched 6" for 22 x 33 M/TSportsman S/R tires
Engine:
· Originalfactory stock LT1 350
o 275 hp (nowputs out 450 hp - see below)
· Modifications:
o None internally- engine has never been out of the car.
o Chrome GMBowtie valve covers (stock black ones were stolen)
o Complete ATIProCharger kit for '93 Z28 (adds 175 hp)
§ P600B supercharger
§ Air to airintercooler
§ Fuel ManagementUnit (FMU) - increases fuel pressureunder boost - currently set to zero
§ K&N airfilter
§ ProCharger 100PSI "booster" fuel pump (redundant external pump located at stockinline fuel filter location)
§ (8) FordMotorsports brand 22 lb/hr fuel injectors (needed for increased fuel pressureunder boost)
o Adjustable fuelpressure regulator (base pressure 43.5 lbs)

o Ignition:
§ MSD 6"Boost Retard" ignition
· Revlimiter ("plug-in" rpm chips - 5700 rpm chip installed)
· Driveradjustable "boost timing retard" knob in console
o Allows driverto reduce ignition timing under boost if low quality fuel causes"pinging"

Front Suspension:
· Narrowedfront suspension to allows car to be lowered 2" from stock
o stock lowercontrol arms narrowed 1.5" per side
o stock uppercontrol arms (unmodified)
o stock spindlesnarrowed 1.5" per side & shortened 2" per side
o stock powerrack & pinion steering box narrowed 1.5" per side
· QA1billet aluminum double adjustable coil/over racing shock absorbers
o Heightadjustable with threaded seat on coil spring
o Hydraulicdamping adjustable with rotary knob at base of shock housing (12 adjustmentpositions)

Rear Suspension:
· NarrowedDana 60 rear axle housing
· Moser 30spline "street" axles
· Dana 60housing ends & sealed ball bearing axle bearings (RP400 series)
· Custom4-link suspension
o Multi positionadjustable housing and frame brackets
o (4) 1"diameter direct thread 4-link bars
o (8) 3/4"shank x 5/8" bore 4130 rod ends (Teflon bushings on spherical balls)
o Custom diagonaltrack bar (on upper 4-link bars)

· QA1billet aluminum double adjustable coil/over shocks
o Heightadjustable with threaded seat on coil spring
o Hydraulicdamping adjustable with rotary knob at base of shock housing (12 adjustmentpositions)
· Wheels:15 x 15 Weld Pro Stars (DOT street legal series - not "drag raceonly" wheels)
· Tires: 22x 33 Sportsman S/R (DOT street legal made by Mickey Thompson)

Rear chassis modifications (back half):
· Allowscar to sit 2" lower that stock
· 2" x3" rectangular front crossmembers
· 2" x3" rectangular rear bumper crossmember
· 2" x3" rectangular frame rails from base of roll bar to rear bumpercrossmember

Also published at eBay.com