1968 Chevrolet Corvette

This is a very nice corvette, I am only looking to sale because I work over sea's and don't have the time to finish her. It has a roller engine with 610 lift for both intake and exhaust, eagle crank and H beam connecting rods, 1.6 roller rockers with griddle clamp. Power master starter, moroso deep oil pan, Holly 850 double pumper. New HEI distributor with new tack cables and 90 degree adapter. Be Cool radiator with dual pusher fans set at 160 degrees with air delete box installed ( i have the ac box which goes with the car) Also installed hooker competition long tube headers with chambered pipes and Flow master mufflers. The turbo 400 was rebuilt with upgraded,clutch, with manual valve. I also installed a B&M quick silver racket shiftier with reverse lock out. Installed LED brake light leans, all the vacuum equipment works as advertised. All dash lights work as well as the gauges. The only ones that don't are, amp and clock. Installed new brake pads and replaced all four rubber brake lines. flushed with new fluid.
For the bad, the right hand electric window jump off track. The car radio works but there is no sound. This happen after the shiftier was installed. I think the enable line to the speaker amp got disconnected . The paint looks good at a distance. The guy I bought it from had a respray done. The back aft right side near the luggage rack has two bad spots in the paint, The odometer stop working some time ago. I only drive her about 150 miles a year. I really hate to sale her but I don't have the time right now
I have the T tops and an after market targo top, smoked in color, made of plexiglass.
rwr="1" style="font-family:Arial" size="4">

Also published at eBay.com