1968 Dodge A108 No Door Panel Van

1968 Dodge A108 Van.I rescued this panel van from the crusher 10 or 12 years ago. It is a factory 318 3sp manual tranny. It was some type of Laundry or Delivery Van in Las Vegas. It still has the signage and lettering on the sides. It is a desert vehicle with NO RUST anywhere. The body is crusty and so cool. My intentions are to leave the body with its patina and put a nice interior in it. I just cant get this project done. If somebody meets my reserve they will get a nice vehicle that all the hard work is done. I have not fired the motor. To fire the motor it needs the wiring finished at the starter and solenoid and the Electric fan wired at the battery and exhaust. The complete drive train is new.
I am not broke, I am not desperate, I know what I have. If you have made it this far you know what I have also. Go find a rust free 108 and put all the time and money to get it this close and realize what a bargain the project is.
I NEED THIS GARAGE STALL FOR ANOTHER PROJECT
Rebuilt 318 30 over with Mild cam
Edelbrock intake and Carb
New Lokar Throttle pedal and cable (needs installed)
New fuel pump
MSD distributor
Headers
Rebuilt original radiator with New Electric fan
Rebuilt Starter
80amp single wire Alternator
Rebuilt 3sp Transmission including 2nd and 3rd gear synchro's
New bushings on both shift linkages
New Clutch
Rebuilt Rear Axle 3:55 ratio
New Bushings on leaf springs
New rear Brakes
New E Brake cables
New 245/60-15 Coopers and Craiger wheels
Heavy Duty Rear Sway Bar
New Fuel Filler hoses and Fuel lines
New Wiring Harness front to back
New windshields and Rubber
New Window Rubber both doors
New door rubber for all doors (not installed)
All Lighting is LED
New reverse lights
Hella H4 headlights
New Gauges
New speedo cable
New Vintage air heater (NO AC)
Resealed steering box
New Tie rod ends and drag link
New King Pins
Scarebird front disc brakes
I have front sway bar but it wont fit with disc brake calipers
New master cylinder
Duetch connectors on every wiring connector
Every thing electrical works, I have supplied power to the harness and have run everything electrical
There is so much that I cant remember but every nut and bolts have been out of this Van
Throw a battery in and wire up the starter and install your favorite exhaust and this thing is ready to go.
feel free to contact me with any questions
Ryan
This van is in Maricopa Arizona 85138

Also published at eBay.com