1963 Dodge Polara 500 All Aluminum 528 Barton Hemi Street Strip Magazine Feature

ESTATE SALE:
1963 Dodge Polara 500
Featured in Mopar Action August 2015
700HP // 630 TQ - 9 Second Street Car
If you are looking for one of the best examples of a high horsepower early 62-65 B Body Mopar look no further.
Outstanding Street Strip 1963 Dodge Polara 500 Mopar Action Magazine Feature car. "Catching Rays"
Very fresh all Aluminum 528 Hemi Super Stock by Super Stock engine builder Ray Barton 2017
Not an original Max Wedge. VIN furnished on request.

This early Mopar is a Show quality Crowd Pleaser that also lays down the power with authority!
The Quality of build of this Polara is seen throughout all facets of this car!
Clean Title for Street Licensing

The 1963 Polara 500 features Hardtop Styling and upgraded Trim.
Much NOS was used to trim out the Body.
Super Stock Appointments including A100 Van seats and original style Aluminum Swiss Cheese Brackets.
Last Certified to 8.50 allowing Strip Duty option with a set of Weld Wheels and Slicks. (needs current Cert)
Also built for Street use with a 10:1 compression and the custom black "Steelie" street steam rollers that are included.
*Vehicle listed on other Mopar sites and Seller reserves right to cancel the listing

History:
Built initially by 60's Mopar Drag Racer Tom Mattingly- Kentucky HOF Class 3 NHRA winner.
Owned from about 2000 by last builder in Fredericksburg VA.
Reworked by Scott Racecars 2009/2017 with Jerry Bickel parts.
2017 Ray Barton Hemi Added
Last owners dream car that passed away 2020.
**1962 saw an increase of NHRA Drag Race popularity with the introduction of the 1962 Dodge and Plymouth B Bodies.
Many great 413 and 426 Max Wedge Cars, and the First 426 Hemi A864 A990 factory Drag Cars were built in this first era
This 1963 Polara's early Drag demeanor is a great return to those days that Mopar dominated drag racing and set the precedent.
1963 Dodges owned the Strip, notably the Ramcharger's Candymatic, and also later highlighted by Dan Dvorak's Stock and Stock Eliminator 63 Sedan.
DETAILS:
Specs Posted from former Owners Show Poster- see photo
Book of Receipts supplied with Purchase- Well over Six Figures

Engine
Custom Built Ray Barton 528 Aluminum Hemi Block and Heads
4.500 Bore RBRE Block
4.150" Sportsman Crank
H Beam 6.86 1.031 Sportsman II Rods
RBRE Custom Aluminum Heads
RBRE Custom Ground Solid Cam and Solid Lifters
RBRE Custom Roller Tip Rockers and Valve Covers
RBRE Intake and Custom Carburetor
All ARP Fasteners and Bolts used
MSD Pro Billet Distributor with Pro Stock style Wires
MP Balancer
MP Starter
Meziere Water Pump and Be Cool Custom Built Cooling system
Powermaster Alternator
Milodon Pan and Oiling
TTI Headers Through custom Full Rear Exit Exhaust
Electronic Exhaust dumps with Key Fob actuation
ELECTRONICS-
MSD 7AL3 Ignition
Custom Battery in Trunk Battery Box
Autometer Gauges
AEM O2 Sensors/Gauges
Switch Panel but retains Key Start
TRANSMISSION-
Race Prepped 727 w/ Turbo Action Reverse Manual Trans Brake Valve Body
Turbo Action Pedestal Mount Shifter
ATI Street/Strip Converter
B&M Flex Plate
Steffs Pan with Quick Disconnect Fittings
TCI Ballistic Shield
ARE Trans Cooler with Fan
Hurst Line Lock
DRIVESHAFT-
Mark Williams Drive Shaft and Yoke
SUSPENSION/REAR-
All Aluminum Floor and Trunk
Jerry Bickel and Scott Racing Parts
Street Freaks Rack and Pinion with Fully Adjustable Tubular Front End
Wilwood Disc Brakes
QA1 Double Adjustable Shocks
Custom Rear Ladder Bar Suspension
Dana 60 with new 456 Gears Limited Slip- Comes with Spool
Strange pro Axles
Moser rear End Cover
Custom Black Steel Street Rims
Weld Drag Rear Wheels
American Racing Torq Thrust Front Wheels
OTHER FEATURES-
Full Custom Exhaust with electronic Key Bob Actuated Cutouts
2 Sets Wheels and Tires
Featured Mopar Action Mag 8/15
NOS Trim Parts Used
Only 2 1/4 Mile passes at 9.80's
Car has been in storage since last owners passing
Current Condition:
Just caringly removed from storage, pre-lubing cylinders and priming engine, 80psi, Fresh Fuel, VR1 50 oil and filter, charged battery.
Turn Key! Idles Great.
Would Be a very Cool German or Australian Exposition Car!
SALE Requirements
Clean Maryland Title
Pick Up in Baltimore Suburbs or arrange shipping
Payment in Full via Bank Wire Transfer, Cleared Check / Cash before Pick Up
Car is sold "As is Where is"

Also published at eBay.com