2006 ford f-350 super duty lariat 6.0l turbo

For Sale:2006 F350 Crew Cab Long Bed, 184,000 miles.Engine runs great. Frame and suspension are solid.Bed was replaced in 2015 and is in good condition.Listing for my husband - he is only the second owner.Clear NC Title in hand.
Specs
•1FTWW33P86EA27316
•4x4
•6.0 Diesel
•5r110 TorqShift Auto Trans
•Dana 60 (6000lb) front end
•Dana 80 (9000lb) rear end
•4.10 gears
•13,000lb GVW
•Pirelli Pista 335/80/R20 (41”x13”) Tires are 90% (Load range H, 7000lbs @ 90 psi).
•Full size Continental MPT80 with spare tire.
•Bushwhacker cut out flares.
•SCT Tuner for monitoring EOT/ECT, etc.
•STC fitting, stand pipes and plugs were all replaced by dealer in 2011.
•June 2015 (140,000 miles) EGR delete kit and full bypass coolant filter installed from Innovative Performance Research.
•July 2015 engine oil cooler replaced along with upgraded filter screen from IPR.
•Banks Power High Flow Intake Elbow
•Sinister Diesel 4” Turbo back Stainless steel exhaust system.
•B&W Turnover ball gooseneck hitch
•High idle mod installed on #3 outfitter switch.
•6 disc CD changer
•Retractable moon roof
•Manual hoist
Recently Installed New Parts (I put over $15k into this truck in the last 24 months)
Front (October 2020):
•Axle shafts from Denny’s Driveshaft (upgraded u-joints)
•Motorcraft hubs
•Motorcraft steering knuckles
•Motorcraft tie rods
•Precision Metal Fab HD tie rod bar
•Precision Metal Fab HD single piece drag link
•Motorcraft Upper and lower ball joints
•2.5” Lift Tuff Truck coil springs
•Fox Racing remote reservoir shocks
•BD Power track bar bushing and Mevotech TTX ball joint
•BD HD adjustable trackbar
•Skyjacker extended sway bar links
Rear (December 2019)
•4400# leaf springs (ATS)
•Precision Metal Fab rear shackle hanger conversion from tension to compression
•Rear shackles (ATS)
•Precision Metal Fab fabricated blocks to correct pinion angle (2.5deg)
•Precision Metal Fab Heavy Duty adjustable alignment pin u-bolt top plates
•¾” U-Bolts (ATS Grade 8)
•Bilstein shocks
•Mag-Hytec high capacity differential cover
Many uninstalled extra parts for this truck included in sale:
•New Ford head gaskets, new ARP head studs, new valve cover gaskets
•New in box cab corners
•New in box Mevotech TTX upper and lower ball joints
•Extra tailgate
•New Dana 80 rear axle housing
•Clean, no rust driver and passenger side front doors.
•New in box Motorcraft transmission filter
•Front Passenger extended stainless steel brake line.
•New cab body mounts and bolts(Energy Star and Motorcraft Hardware
•Misc bolts, seals and hardware (Motorcraft)
•New in box complete set of 8 bed bolts
•Husky cross bed tool box with twin Viair compressors
Specialty tools included in sale:
•Rear hub spindle lock nut socket
•Injection pressure regulator valve socket
•OTC 6697 F250/F350 front axle oil seal installer new in box
I also have some additional fluids for truck that I will include in the sale.
*Rear axle needs new backing plates and e-brakes; rear right hub bearing is worn.
*Needs new power steering cooler
*This was my daily driver until February 2021.
You will need a trailer for the truck and all parts.
No warranty written or implied.Truck is sold “as is.” Certified cashier’s check accepted.We do not accept personal checks, you need a bank check, wire transfer or cash.

Also published at eBay.com