1931 Ford Model A
Sale price: $28,000.00
make an offer
Technical specifications
| Manufacturer: | Ford |
| Model: | Model A |
| Year: | 1931 |
| Mileage: | 2,000 |
| Engine: | 354 Hemi |
| Trim: | coupe |
| Got questions? | Ask the Seller |
Current customer rating:
()
based on 2 votes
()based on 2 votes
Photos
Description
Call it what you want this car is unreal. Extremely well built and runs/drives VERY well I cannot stress this enough, nothing like most out there that are for looks. thought out, perfectly executed DRIVER! I will no doubt regret selling this car and hate that I have to. please feel free to ask any questions but I also ask that you are serious and respect my time.
Body:
1931 Ford Model A coupe. 6" chop, channeled 4". All rust was removed and patch panels were made and welded in. Paint is single stage in a 2 tone brown.
Chassis:
Custom built from 2x6 tubing, this isn't a simple Z'd frame. It has custom sweeps at the front and rear. The front rails sweep approx. 5" and the back is swept up about 18", the frame has a nice Deco feel and flows very well. All the joint fitments were done to code and all the welds are full penetration.. The frame has been sectioned down to 4" where the driver would sit to create more head room so the car looks like it has a 6" channel but it's really only 4". Frame is painted in tan brown.
Suspension:
Custom made 4" dropped axle from lucky 7. It has stars CNC'd into the axle.
Ride technologies Air Ride- Front and Rear. This is NOT a suicide front end, it has a wheelbase of 106" like a 32 and is proportionally correct. Car rides really smooth and nice. Very driveable ANYWHERE, it has 6" of travel in the air bags.
Wishbones on the front
Four bar rear with panhard bar
Ford 8.8" 3.73 posi rear end with drum brakes.
1958 Buick Drums with Wilson welding hubs on 1937 Ford spindles and early Lincoln style backing plates.
Engine:
1956 354 Chrysler Hemi, bored .30 over and built by D&W engines, it's a brand new Hemi!
Tunnel Ram with 3 Rochester 2G carbs
BBC water pump
Custom ground cam
Way too much to list, I've invested nearly 15K just into the engine. It's building approx. 400hp, runs like a watch and is just a pure animal in this little hotrod!
Engine is painted in a root beer color and pinstriped valve covers.
Transmission:
TH350 with shift kit and 2800 stall convertor
Wheels:
Original 1935 Ford wires, powder coated black with 32 V8 caps
750-16 Firestone wide whites on rear
600-16 Firestone wide whites on front
Interior:
Custom made FULL aluminum and copper riveted interior. Bead rolled and looks like a bomber plane inside. It has a bench style seat in chocolate vinyl.
New wood kit, stained and sealed to look like old barn wood.
1938 Ford steering column
1938 Ford Banjo steering wheel
All new Dolphin gauges in tan brown
Custom made dash from a 64 Chevrolet c80 truck
Dash is pinstriped
I will gladly help with getting this car to a shipper and have experience in cross boarder transactions. although its up to you to arrange shipping. I have the clear TITLE in my name. and yes it uses its original VIN and is titled as a 31.
ALL lights work, running, signals, hazards, turn, gauges, etc. no side glass but regulators are there. email me for any questions and I will give you my number to talk or send more pics/vids again if your serious.
Also published at eBay.ca
Body:
1931 Ford Model A coupe. 6" chop, channeled 4". All rust was removed and patch panels were made and welded in. Paint is single stage in a 2 tone brown.
Chassis:
Custom built from 2x6 tubing, this isn't a simple Z'd frame. It has custom sweeps at the front and rear. The front rails sweep approx. 5" and the back is swept up about 18", the frame has a nice Deco feel and flows very well. All the joint fitments were done to code and all the welds are full penetration.. The frame has been sectioned down to 4" where the driver would sit to create more head room so the car looks like it has a 6" channel but it's really only 4". Frame is painted in tan brown.
Suspension:
Custom made 4" dropped axle from lucky 7. It has stars CNC'd into the axle.
Ride technologies Air Ride- Front and Rear. This is NOT a suicide front end, it has a wheelbase of 106" like a 32 and is proportionally correct. Car rides really smooth and nice. Very driveable ANYWHERE, it has 6" of travel in the air bags.
Wishbones on the front
Four bar rear with panhard bar
Ford 8.8" 3.73 posi rear end with drum brakes.
1958 Buick Drums with Wilson welding hubs on 1937 Ford spindles and early Lincoln style backing plates.
Engine:
1956 354 Chrysler Hemi, bored .30 over and built by D&W engines, it's a brand new Hemi!
Tunnel Ram with 3 Rochester 2G carbs
BBC water pump
Custom ground cam
Way too much to list, I've invested nearly 15K just into the engine. It's building approx. 400hp, runs like a watch and is just a pure animal in this little hotrod!
Engine is painted in a root beer color and pinstriped valve covers.
Transmission:
TH350 with shift kit and 2800 stall convertor
Wheels:
Original 1935 Ford wires, powder coated black with 32 V8 caps
750-16 Firestone wide whites on rear
600-16 Firestone wide whites on front
Interior:
Custom made FULL aluminum and copper riveted interior. Bead rolled and looks like a bomber plane inside. It has a bench style seat in chocolate vinyl.
New wood kit, stained and sealed to look like old barn wood.
1938 Ford steering column
1938 Ford Banjo steering wheel
All new Dolphin gauges in tan brown
Custom made dash from a 64 Chevrolet c80 truck
Dash is pinstriped
I will gladly help with getting this car to a shipper and have experience in cross boarder transactions. although its up to you to arrange shipping. I have the clear TITLE in my name. and yes it uses its original VIN and is titled as a 31.
ALL lights work, running, signals, hazards, turn, gauges, etc. no side glass but regulators are there. email me for any questions and I will give you my number to talk or send more pics/vids again if your serious.
Also published at eBay.ca
