1993 Hummer H1
Sale price: $16,200.00
make an offer
Technical specifications
| Manufacturer: | Hummer |
| Model: | H1 |
| Year: | 1993 |
| Type: | 4 door soft top |
| Fuel Type: | diesel |
| Color: | Camoflage dark green and black |
| Mileage: | 80,283 |
| Interior Color: | Greeen and black |
| Engine: | 3.9L Cummins 4BT |
| Trim: | Onroad/ Offroad Beast or buy it for parts |
| Number of Cylinders: | 4 |
| Got questions? | Ask the Seller |
Current customer rating:
()
based on 10 votes
()based on 10 votes
Photos
Description
Just picked this up, have not gone through it completely yet, issues found thus far noted below. It starts and purrs like a kitten..like a Cummins 4BT does. This truck needs going through there are a few small issues, hoses and electrical that I am not happy with.
Winches front and back. 38x 15.5 16.5 TSL super swampers, still some tread 0.2" fronts 0.4" rear tires, Military X- doors, nice brush guard.
It is an awesome looking beast from 10 ft. Some time well spent on this unit would bring it up to a very desirable off road and street beast.
I am listing this unit now before going through it. As time and money is spent on it the price will need to increase.
Clear title. I have the carfax also. Not a salvage vehicle.
Buy it now or send me an offer to consider.
I can arrange at buyers cost to transport to Sweet Grass, Montana for US buyers. US buyers need to complete the customs and importation documentation and procedures in advance of the vehicle reaching the border. (make arrangements)
137XE823XPE143561
1=USA
3=AMG
7=Commercial
X=6.2L Diesel
E= 3 speed GM3L80 Automatic Transmission
82= VLC2 (recruit series 2 door pickup style)
3= 10,000-14,000lb GVWR
X
P=1993 model year
E=Plant code Mishawaka
143561= serial number
The good:
Solid roll cage, winches front and back, solid running BT4 engine,
X-doors are in excellent shape
8k winches front and back.
The bad:
Requires the electric fan hooked into switch or thermostat, currently the electric cooling fan works when powered up but is not wired in to engage automatically (relay ordered)
Sway bar had been removed by previous owner.
One torn CV Boot front right (boots ordered)
Engine mounts should be replaced with improved design. Currently front drive shaft is not able to be hooked up due to pan location. It would be best to raise engine 1-2 more inches to allow for driveshaft
Alternator not working (currently sourcing replacement- should have in place for new owner)
Accelerator pedal could be replaced to allow for better spring back. current set up works but could be improved ( hot rod style bolted to floor board or heavy equipment type accelerator pedal would be better)
Automatic transmission pan gasket has a slight leak.
There is some work to do to finish this project truck but the bones are good. The engine is a Cummins Recon, the 7100 pump is in great shape ($$$).
In parts alone the truck would fetch a minimum of $22,000USD
Also published at eBay.ca
Winches front and back. 38x 15.5 16.5 TSL super swampers, still some tread 0.2" fronts 0.4" rear tires, Military X- doors, nice brush guard.
It is an awesome looking beast from 10 ft. Some time well spent on this unit would bring it up to a very desirable off road and street beast.
I am listing this unit now before going through it. As time and money is spent on it the price will need to increase.
Clear title. I have the carfax also. Not a salvage vehicle.
Buy it now or send me an offer to consider.
I can arrange at buyers cost to transport to Sweet Grass, Montana for US buyers. US buyers need to complete the customs and importation documentation and procedures in advance of the vehicle reaching the border. (make arrangements)
137XE823XPE143561
1=USA
3=AMG
7=Commercial
X=6.2L Diesel
E= 3 speed GM3L80 Automatic Transmission
82= VLC2 (recruit series 2 door pickup style)
3= 10,000-14,000lb GVWR
X
P=1993 model year
E=Plant code Mishawaka
143561= serial number
The good:
Solid roll cage, winches front and back, solid running BT4 engine,
X-doors are in excellent shape
8k winches front and back.
The bad:
Requires the electric fan hooked into switch or thermostat, currently the electric cooling fan works when powered up but is not wired in to engage automatically (relay ordered)
Sway bar had been removed by previous owner.
One torn CV Boot front right (boots ordered)
Engine mounts should be replaced with improved design. Currently front drive shaft is not able to be hooked up due to pan location. It would be best to raise engine 1-2 more inches to allow for driveshaft
Alternator not working (currently sourcing replacement- should have in place for new owner)
Accelerator pedal could be replaced to allow for better spring back. current set up works but could be improved ( hot rod style bolted to floor board or heavy equipment type accelerator pedal would be better)
Automatic transmission pan gasket has a slight leak.
There is some work to do to finish this project truck but the bones are good. The engine is a Cummins Recon, the 7100 pump is in great shape ($$$).
In parts alone the truck would fetch a minimum of $22,000USD
Also published at eBay.ca
