Mazda : Mazda6 Speed6
Sale price: $11,500.00
make an offer
Technical specifications
| Manufacturer: | Mazda |
| Model: | Mazda6 |
| Year: | 2007 |
| Type: | Sedan |
| Color: | Black |
| Mileage: | 75,000 |
| Transmission: | Manual |
| Interior Color: | Black |
| Engine: | 2.3 turbo |
| Trim: | Speed |
| Number of Cylinders: | 4 |
| Got questions? | Ask the Seller |
Current customer rating:
()
based on 2 votes
()based on 2 votes
Photos
Description
Selling my 2007 Mazdaspeed6.74000 miles (or 119000kms) Its in great shape, no rust on the body. Chassis is up to specs, nothing needs to be done.Transmission is smooth on all gears. AWD works without any glitches or noises. Suspension is firm and handles good. Interior is very clean, leather seats are near perfect. Since its my personal car, and my daily driver I didn't feel the need to lower the car and install a performance exhaust or upgrade to a bigger turbo. I wanted to retained as much as the stock car offered but with an extra punch and not worrying about throwing a rod(s) through the block! Please note that the car as never been tracked or raced or seen a dyno.
I would prefer to sell locally(since I've never sold a car outside Canada) But I'm willing to sell outside Canada. Please note that the car is listed elsewhere, so the auction could be ended early.
As for the engine, its been totally rebuilt in fall 2014. Here is the specs of the engine;
*Cobb Accessport V2
*Rebuilt 2.3 shortblock
*Cylinder bored .020 over
*JBR egr delete kit
*JBR Balance shaft delete kit
*Complete DISI cylinder Head rebuilt;
Supertech 5.5mm valve guide
Supertech 5.5mm valve seals
Recut Valve seat
Inconel Supertech in./ex. valves
*3” catless stainless downpipe
*New K04 Turbo
*Upgraded injector seals
*Eagle forged connecting rods
*88mm forged Wiseco Pistons
*ARP head studs
*ARP main studs
*Cometic Head gasket (.045”)
*Autotech high pressure fuel pump
*Custom Front mount intercooler (31*9*3)
*50mm blow off valve
*NGK LTR7IX-11 spark plugs
* 3" aluminium Turbo inlet pipe
*Sure Aeros SI Maf housing (not shown)
*Fidanza aluminium flywheel
*New Luk clutch kit
*Custom Intercooler piping
Recently changed : New front brakes(rotors ans pads) and new rear shocks.
Please fill free to email me for any question. Thanks for looking.
Also published at eBay.ca
I would prefer to sell locally(since I've never sold a car outside Canada) But I'm willing to sell outside Canada. Please note that the car is listed elsewhere, so the auction could be ended early.
As for the engine, its been totally rebuilt in fall 2014. Here is the specs of the engine;
*Cobb Accessport V2
*Rebuilt 2.3 shortblock
*Cylinder bored .020 over
*JBR egr delete kit
*JBR Balance shaft delete kit
*Complete DISI cylinder Head rebuilt;
Supertech 5.5mm valve guide
Supertech 5.5mm valve seals
Recut Valve seat
Inconel Supertech in./ex. valves
*3” catless stainless downpipe
*New K04 Turbo
*Upgraded injector seals
*Eagle forged connecting rods
*88mm forged Wiseco Pistons
*ARP head studs
*ARP main studs
*Cometic Head gasket (.045”)
*Autotech high pressure fuel pump
*Custom Front mount intercooler (31*9*3)
*50mm blow off valve
*NGK LTR7IX-11 spark plugs
* 3" aluminium Turbo inlet pipe
*Sure Aeros SI Maf housing (not shown)
*Fidanza aluminium flywheel
*New Luk clutch kit
*Custom Intercooler piping
Recently changed : New front brakes(rotors ans pads) and new rear shocks.
Please fill free to email me for any question. Thanks for looking.
Also published at eBay.ca
