Mazda Rx7 FD3S Race Car
Sale price: $9,000.00
make an offer
Technical specifications
| Manufacturer: | Mazda |
| Model: | RX-7 |
| Type: | Coupe |
| Transmission: | Manual |
| Got questions? | Ask the Seller |
Current customer rating:
()
based on 4 votes
()based on 4 votes
Photos
Description
For Sale
My Mazda Rx-7 2000 model series 8
Import with compliance plates and tags
Was last registered in Dec 2010, clear title no accident damage.
Wide body
Front guards will accept 18 x 10 et 38
Was planing on running 18x 10's all round with same offset to allow rotation of tyres.
Rear fenders are feed.
Modified for lap sprint or time attack
AGI National spec bolt in cage
38L fuel cell , internal lift pump, external surge tank and 044 Bosch primary fuel pump all sealed from the cabin (CAM's spec enclosure).
Standard motor with Single turbo conversion T04 (.70 front housing and .82 rear for early response), turbo smart wastegate mounted with V band fittings.
V Mount radiator/ oil cooler / intercooler setup.
Oil metering pump modified to be externally adjustable and uses a external supply tank and rotary aviation adaptor ( no need to premix, only top up your tank).
Needs a ECU and body wiring and other minor work to be finished to run.
Fibreglass Dash
Drivers floor modified to allow drivers seat to be mounted lower and further inboard for taller drivers.
Door interior skins removed, Lexan door Windows fitted with NACA vents
Will come with approximately 20m of white vinyl wrap as spare. Also will come with other spares eg standard glass windows, 1600cc injectors and billet secondary fuel rail.
This is a race car, too much work would be required to return to a street registerable vehicle..
Also published at eBay.com.au
My Mazda Rx-7 2000 model series 8
Import with compliance plates and tags
Was last registered in Dec 2010, clear title no accident damage.
Wide body
Front guards will accept 18 x 10 et 38
Was planing on running 18x 10's all round with same offset to allow rotation of tyres.
Rear fenders are feed.
Modified for lap sprint or time attack
AGI National spec bolt in cage
38L fuel cell , internal lift pump, external surge tank and 044 Bosch primary fuel pump all sealed from the cabin (CAM's spec enclosure).
Standard motor with Single turbo conversion T04 (.70 front housing and .82 rear for early response), turbo smart wastegate mounted with V band fittings.
V Mount radiator/ oil cooler / intercooler setup.
Oil metering pump modified to be externally adjustable and uses a external supply tank and rotary aviation adaptor ( no need to premix, only top up your tank).
Needs a ECU and body wiring and other minor work to be finished to run.
Fibreglass Dash
Drivers floor modified to allow drivers seat to be mounted lower and further inboard for taller drivers.
Door interior skins removed, Lexan door Windows fitted with NACA vents
Will come with approximately 20m of white vinyl wrap as spare. Also will come with other spares eg standard glass windows, 1600cc injectors and billet secondary fuel rail.
This is a race car, too much work would be required to return to a street registerable vehicle..
Also published at eBay.com.au
