2005 Mazda RX-8
Sale price: $8,000.00
make an offer
Technical specifications
Manufacturer: | Mazda |
Model: | RX-8 |
Year: | 2005 |
Color: | Blue |
Mileage: | 48,000 |
Trim: | GT |
Got questions? | Ask the Seller |
Current customer rating:
(
based on 7 votes )
based on 7 votes )
Photos
Description
Mazda RX-8 GT modified
for track racing but streetable comfortably. Will not attract too much of
police attention because of his ''no show, all go'' look.
Bought brand new in 2006 in Montreal area (Quebec, Canada), always stored in a heated garage in winter, modified turbo by Mazsport (Florida, USA) in 2007, retuned at 12psi on 94 octane in 2013 by Mazdees (Toronto, Ontario), maintenance made by Derwin Tuning/Works (Terrebonne, Quebec) last one in april 2015. Engine assembled half new/half refurbished and ported by Rotaryengines (Calgary, Alberta). Always ran the engine with Brad Penn oil (Penn Grade 1) and mixed gasoline at each fill up. New pads / discs brakes at each corners and come with Potenza RE11 on each 18'' Enkei RPO3. The last wheels alignement was made this spring same time as the oils change all around.
The car have less than 48k miles, the engine and all the vacc hoses, oil metering / water / gas pumps, waste gate have less than 4k miles, the tranny approx. 10k miles.
The car run smoothly on the street but can be brutal on the track.
I didn't test it on the dyno since the last tune, but the microtech tuner estimate the horsepower about 450+ on the engine. Can easily retune it to any octane or boost map by most of rotary tuners.
HERES THE BIG LINES FOR THE GROCERY LIST
Microtech dash display
Racing beat triple dash pod
PWR 55mm Vmount radiator
engine street ported
turbo T3/T4
Precision external wastegate Vband
Big TMIC with black anodized OEM look piping
Microtech with Interceptor-X, computer, cables and dongle
Greddy blow-off valve, turbo timer and boost controler
AEM coils and cables high output
Unorthodox lightweight pulleys
engine oil filter relocation kit
Re-medy high flow water pump
Walbro 255lph gasoline pump
Enkei RPO3 18" forged lightweight mags wheels
oil temp, oil press, water temp, egt, all electronics gauges
supension, sway bars, engine mounts and more by koni, racingbeat, custom
turbo back exhaust system in S/S 3" with dual output single tip
etc
I prefere local pick-up it's more easy, you come to see it, try it and pay for it, (cash or paypal only) and then enjoy it. Otherwise I can help with the shipping but, you'll have to pay for. The RX8 is located in Montreal area.
Had passed ahead of some: C5 corvette, recents 5.0L mustangs, 600cc bikes, 350z low boost, etc.
Je parle également en français
face="Times New Roman" size="3">
Also published at eBay.ca
Bought brand new in 2006 in Montreal area (Quebec, Canada), always stored in a heated garage in winter, modified turbo by Mazsport (Florida, USA) in 2007, retuned at 12psi on 94 octane in 2013 by Mazdees (Toronto, Ontario), maintenance made by Derwin Tuning/Works (Terrebonne, Quebec) last one in april 2015. Engine assembled half new/half refurbished and ported by Rotaryengines (Calgary, Alberta). Always ran the engine with Brad Penn oil (Penn Grade 1) and mixed gasoline at each fill up. New pads / discs brakes at each corners and come with Potenza RE11 on each 18'' Enkei RPO3. The last wheels alignement was made this spring same time as the oils change all around.
The car have less than 48k miles, the engine and all the vacc hoses, oil metering / water / gas pumps, waste gate have less than 4k miles, the tranny approx. 10k miles.
The car run smoothly on the street but can be brutal on the track.
I didn't test it on the dyno since the last tune, but the microtech tuner estimate the horsepower about 450+ on the engine. Can easily retune it to any octane or boost map by most of rotary tuners.
HERES THE BIG LINES FOR THE GROCERY LIST
Microtech dash display
Racing beat triple dash pod
PWR 55mm Vmount radiator
engine street ported
turbo T3/T4
Precision external wastegate Vband
Big TMIC with black anodized OEM look piping
Microtech with Interceptor-X, computer, cables and dongle
Greddy blow-off valve, turbo timer and boost controler
AEM coils and cables high output
Unorthodox lightweight pulleys
engine oil filter relocation kit
Re-medy high flow water pump
Walbro 255lph gasoline pump
Enkei RPO3 18" forged lightweight mags wheels
oil temp, oil press, water temp, egt, all electronics gauges
supension, sway bars, engine mounts and more by koni, racingbeat, custom
turbo back exhaust system in S/S 3" with dual output single tip
etc
I prefere local pick-up it's more easy, you come to see it, try it and pay for it, (cash or paypal only) and then enjoy it. Otherwise I can help with the shipping but, you'll have to pay for. The RX8 is located in Montreal area.
Had passed ahead of some: C5 corvette, recents 5.0L mustangs, 600cc bikes, 350z low boost, etc.
Je parle également en français
face="Times New Roman" size="3">
Also published at eBay.ca