Damascus Red 1974 MG MGBI-4 4 Speed manual Available Now!
Sale price: $1000,00
make an offer
Technical specifications
| Manufacturer: | MG |
| Model: | MGB |
| Year: | 1974 |
| Type: | -- |
| Fuel Type: | Gasoline |
| Color: | Red |
| Mileage: | 88216 |
| Transmission: | Manual |
| Interior Color: | Black |
| Engine: | I-4 |
| Got questions? | Ask the Seller |
Current customer rating:
()
based on 6 votes
()based on 6 votes
Photos
Description
Vehicle Original VIN : GHN5UE337814G
[ omitted ]. Its details were first published on 19 September 1962.[3] Variants include the MGB GT three-door 2+2 coupé (1965-1980), the six-cylinder roadster and coupé MGC (1967-69), and the eight-cylinder 2+2 coupé, the MGB GT V8 (1973-76)
1974.5 to 1980
Early MGBs used the "banjo" type differential carried over from the MGA with the rear axle ratio reduced from the MGA's 4.1 (or 4.3) to 3.9 to 1. (Compensating for the reduction from 15 inch to 14-inch (360 mm) wheels). MGB GTs first began using a tube-type rear axle in 1967. This unit was substantially stronger, being, like the later gearbox, designed for the three-litre MGC. All MGBs used the tube-type axle from 1968.
All MGBs were fitted with 11-inch (280 mm) solid (non-ventilated) disc brakes on the front with drum brakes on the rear. The front brake calipers were manufactured by Lockheed and used two pistons per caliper. The brake system on the MGB GT was the same as the roadster with the exception of slightly larger rear brake cylinders. A single-circuit hydraulic system was used before 1968 when dual-circuit (separate front and rear systems) were installed on all MGBs to comply with US regulations. Servo assistance (power brakes) was not standard until 1975. Many modern and contemporary testers have commented on the very heavy brake pedal pressure needed to stop the non-servo-assisted cars.[citation needed]
The MGB initially had an extremely simple electrical system. Dash-mounted toggle switches controlled the lights, ventilation fan, and wipers with only the direction indicators being mounted on a stalk on the steering column. The ignition switch was also mounted on the dash. Like the MGA, the MGB utilized two 6-volt batteries wired in series to give a 12-volt positive earth configuration. The batteries were placed under a scuttle panel behind the seats making access difficult; the location gave great weight distribution and thus improved handling. The charging system used a Lucas dynamo. Later MGBs had considerable changes to the electrical system including the use of a single 12-volt battery, a change from positive to negative earth, safety-type toggle (rocker) switches, alternator in lieu of dynamo, additional warning lights and buzzers, and most common functions moved to steering column stalks.
From 1972 there were two different Pirelli Cinturato radial tyre sizes factory-fitted to new cars, depending on whether the car was a roadster,(155/80x14) or a GT,(165/80x14).The original tyres for the majority of MG B's were 165HR14 Pirelli Cinturato.[12] With the 1974.5 arrival of the rubber bumper cars the factory-fitted tyre size was simplified to 165/80x14 for all cars, irrespective of whether the car was a roadster or a GT, and also irrespective of the wheel type (wire or RoStyle). Later on during the rubber bumper production period, alloy wheels were introduced on several different limited edition models - with the final 1,000 LE models being the last cars to leave the factory with alloy wheels. The factory built V8s were fitted with full profile 175HR14 tyres. (Source: WikiPedia)
Don't miss your opportunity to own a piece of real British Motor Company history. [ omitted ]. [ omitted ].
Vehicle Description
Vehicle Original VIN : GHN5UE337814G
[ omitted ]. Its details were first published on 19 September 1962.[3] Variants include the MGB GT three-door 2+2 coupé (1965-1980), the six-cylinder roadster and coupé MGC (1967-69), and the eight-cylinder 2+2 coupé, the MGB GT V8 (1973-76)
1974.5 to 1980
Early MGBs used the "banjo" type differential carried over from the MGA with the rear axle ratio reduced from the MGA's 4.1 (or 4.3) to 3.9 to 1. (Compensating for the reduction from 15 inch to 14-inch (360 mm) wheels). MGB GTs first began using a tube-type rear axle in 1967. This unit was substantially stronger, being, like the later gearbox, designed for the three-litre MGC. All MGBs used the tube-type axle from 1968.
All MGBs were fitted with 11-inch (280 mm) solid (non-ventilated) disc brakes on the front with drum brakes on the rear. The front brake calipers were manufactured by Lockheed and used two pistons per caliper. The brake system on the MGB GT was the same as the roadster with the exception of slightly larger rear brake cylinders. A single-circuit hydraulic system was used before 1968 when dual-circuit (separate front and rear systems) were installed on all MGBs to comply with US regulations. Servo assistance (power brakes) was not standard until 1975. Many modern and contemporary testers have commented on the very heavy brake pedal pressure needed to stop the non-servo-assisted cars.[citation needed]
The MGB initially had an extremely simple electrical system. Dash-mounted toggle switches controlled the lights, ventilation fan, and wipers with only the direction indicators being mounted on a stalk on the steering column. The ignition switch was also mounted on the dash. Like the MGA, the MGB utilized two 6-volt batteries wired in series to give a 12-volt positive earth configuration. The batteries were placed under a scuttle panel behind the seats making access difficult; the location gave great weight distribution and thus improved handling. The charging system used a Lucas dynamo. Later MGBs had considerable changes to the electrical system including the use of a single 12-volt battery, a change from positive to negative earth, safety-type toggle (rocker) switches, alternator in lieu of dynamo, additional warning lights and buzzers, and most common functions moved to steering column stalks.
From 1972 there were two different Pirelli Cinturato radial tyre sizes factory-fitted to new cars, depending on whether the car was a roadster,(155/80x14) or a GT,(165/80x14).The original tyres for the majority of MG B's were 165HR14 Pirelli Cinturato.[12] With the 1974.5 arrival of the rubber bumper cars the factory-fitted tyre size was simplified to 165/80x14 for all cars, irrespective of whether the car was a roadster or a GT, and also irrespective of the wheel type (wire or RoStyle). Later on during the rubber bumper production period, alloy wheels were introduced on several different limited edition models - with the final 1,000 LE models being the last cars to leave the factory with alloy wheels. The factory built V8s were fitted with full profile 175HR14 tyres. (Source: WikiPedia)
Don't miss your opportunity to own a piece of real British Motor Company history. [ omitted ]. [ omitted ].
Vehicle Warranty
This vehicle is "For Sale by Owner," displayed at Gateway Classic Cars, who is acting only as a Sales Agent. The Company is not making any representations as to the condition and/or the value of this vehicle. Gateway Classic Cars has not checked the condition (mechanical or structural), mileage or authenticity of this vehicle and is relying on the information provided by the seller. The company is not responsible for omissions and/or errors in advertising this vehicle and the buyer shall hold the Company harmless from all future claims arising from any representations made by the Seller. All vehicles are sold on an AS-IS, WHERE-IS basis.
OR
This Vehicle is owned by the Company, however, the Company is not making any representations as to the condition, authenticity, mileage or originality of this vehicle. The Company is not issuing any warranties, verbal or written and is not responsible for any omissions or errors in advertising. The Customer is relying solely on the previous owners information and/or its own inspection, knowledge and judgment on this vehicle. The Company is not a certified mechanic or appraiser. All vehicles are sold on an AS-IS, WHERE-IS basis
About Gateway Classic Cars of Denver
special interest vehicle?
With over Gateway Classic Cars is your premier consignment company!
Selling your car has never been easier thanks to Gateway Classic Cars. Our proven team will remove the stress of selling privately and the risks of losing money at auction. You retain ownership and title of the vehicle until we sell it! Your vehicle receives a professional photo shoot of up to 100 pictures and a 34,000 collectors around the world
special interest vehicle?
With over Gateway Classic Cars is your premier consignment company!
Selling your car has never been easier thanks to Gateway Classic Cars. Our proven team will remove the stress of selling privately and the risks of losing money at auction. You retain ownership and title of the vehicle until we sell it! Your vehicle receives a professional photo shoot of up to 100 pictures and a 34,000 collectors around the world
Contact us for more details
(303) 351-7059(303) 351-7059
Terms and Conditions
Payment Options
We accept the following payment methods:
- Cashier's Check/money order
- Cash (in person)
- Personal check (once cleared)
Vehicle Pickup & Shipping
All shipping charges are buyer's responsibility.
Finance, Warranty, Shipping question?
Call the dealer at (303) 351-7059
General Terms
AVAILABILITY: We advertise our inventory across multiple websites. It is best practice to inquire about the advertised vehicle prior to purchasing in order confirm that it was not already sold. Vehicles may be sold prior to its eBay advertising ending, and we reserve the right to end advertising/listing early or to cancel any and all bids/offers solely at our discretion and shall not be held liable for any such cancellation. In the event that a bidder has the winning bid or finalizes the buy it now price, but did not check availability and the vehicle was sold before a deposit and contracts were executed, then we are not liable nor responsible.
AS-IS WHERE-IS: All vehicles are sold on an AS-IS WHERE-IS basis. Having a third party inspection and addressing any concerns is recommended prior to purchase. It is the sole responsibility of the purchaser to verify all advertisements which shall include but not limited to options, accessories, and vehicle condition before time of sale. If the purchaser chooses to waive an inspection, the AS-IS WHERE-IS is still enforced. Any concerns will not be addressed post sale as the sale is final without cures or remedies.
PAYMENT: We require a non-refundable $1,000 deposit within 24 hours of offer being placed. A deposit is a commitment to purchase and is applied towards the purchase price. The commitment to purchase is not contingent upon inspection, financing, or any other terms or conditions.
We require full payment within 7 days of offer acceptance, unless other arrangements are agreed to in writing.
If the deposit and/or full payment are not provided within said time frame, all vehicles will be relisted and transaction will be considered null and void.
We accept wire transfer (preferred), cashier's check, personal check (vehicle shipment will be delayed until check clears), ACH, credit cards (for the agreed deposit amount only and will incur a 3% fee), and in person cash payments. We also offer vehicle financing, please inquire for details prior to making bids/offers. PayPal and American Express is not accepted.
VEHICLE RELEASE: Signed purchase packet which shall include but not limited to the purchase contract, cleared payment in full, and a copy of your driver's license will be needed before the vehicle is released.
Fees and Taxes
All finalized transactions will have additional charges if applicable which could include the following: sales tax, title fees, license & registration fees, and other additional government or licensing agency charges to register the vehicle. The purchaser is responsible for these charges.
The advertised price and winning auction bids shall include a document fee of $397.63.
All credit cards are charged a 3% convenient fee.
Also published at eBay.com
[ omitted ]. Its details were first published on 19 September 1962.[3] Variants include the MGB GT three-door 2+2 coupé (1965-1980), the six-cylinder roadster and coupé MGC (1967-69), and the eight-cylinder 2+2 coupé, the MGB GT V8 (1973-76)
1974.5 to 1980
Early MGBs used the "banjo" type differential carried over from the MGA with the rear axle ratio reduced from the MGA's 4.1 (or 4.3) to 3.9 to 1. (Compensating for the reduction from 15 inch to 14-inch (360 mm) wheels). MGB GTs first began using a tube-type rear axle in 1967. This unit was substantially stronger, being, like the later gearbox, designed for the three-litre MGC. All MGBs used the tube-type axle from 1968.
All MGBs were fitted with 11-inch (280 mm) solid (non-ventilated) disc brakes on the front with drum brakes on the rear. The front brake calipers were manufactured by Lockheed and used two pistons per caliper. The brake system on the MGB GT was the same as the roadster with the exception of slightly larger rear brake cylinders. A single-circuit hydraulic system was used before 1968 when dual-circuit (separate front and rear systems) were installed on all MGBs to comply with US regulations. Servo assistance (power brakes) was not standard until 1975. Many modern and contemporary testers have commented on the very heavy brake pedal pressure needed to stop the non-servo-assisted cars.[citation needed]
The MGB initially had an extremely simple electrical system. Dash-mounted toggle switches controlled the lights, ventilation fan, and wipers with only the direction indicators being mounted on a stalk on the steering column. The ignition switch was also mounted on the dash. Like the MGA, the MGB utilized two 6-volt batteries wired in series to give a 12-volt positive earth configuration. The batteries were placed under a scuttle panel behind the seats making access difficult; the location gave great weight distribution and thus improved handling. The charging system used a Lucas dynamo. Later MGBs had considerable changes to the electrical system including the use of a single 12-volt battery, a change from positive to negative earth, safety-type toggle (rocker) switches, alternator in lieu of dynamo, additional warning lights and buzzers, and most common functions moved to steering column stalks.
From 1972 there were two different Pirelli Cinturato radial tyre sizes factory-fitted to new cars, depending on whether the car was a roadster,(155/80x14) or a GT,(165/80x14).The original tyres for the majority of MG B's were 165HR14 Pirelli Cinturato.[12] With the 1974.5 arrival of the rubber bumper cars the factory-fitted tyre size was simplified to 165/80x14 for all cars, irrespective of whether the car was a roadster or a GT, and also irrespective of the wheel type (wire or RoStyle). Later on during the rubber bumper production period, alloy wheels were introduced on several different limited edition models - with the final 1,000 LE models being the last cars to leave the factory with alloy wheels. The factory built V8s were fitted with full profile 175HR14 tyres. (Source: WikiPedia)
Don't miss your opportunity to own a piece of real British Motor Company history. [ omitted ]. [ omitted ].
Vehicle Description
Vehicle Original VIN : GHN5UE337814G
[ omitted ]. Its details were first published on 19 September 1962.[3] Variants include the MGB GT three-door 2+2 coupé (1965-1980), the six-cylinder roadster and coupé MGC (1967-69), and the eight-cylinder 2+2 coupé, the MGB GT V8 (1973-76)
1974.5 to 1980
Early MGBs used the "banjo" type differential carried over from the MGA with the rear axle ratio reduced from the MGA's 4.1 (or 4.3) to 3.9 to 1. (Compensating for the reduction from 15 inch to 14-inch (360 mm) wheels). MGB GTs first began using a tube-type rear axle in 1967. This unit was substantially stronger, being, like the later gearbox, designed for the three-litre MGC. All MGBs used the tube-type axle from 1968.
All MGBs were fitted with 11-inch (280 mm) solid (non-ventilated) disc brakes on the front with drum brakes on the rear. The front brake calipers were manufactured by Lockheed and used two pistons per caliper. The brake system on the MGB GT was the same as the roadster with the exception of slightly larger rear brake cylinders. A single-circuit hydraulic system was used before 1968 when dual-circuit (separate front and rear systems) were installed on all MGBs to comply with US regulations. Servo assistance (power brakes) was not standard until 1975. Many modern and contemporary testers have commented on the very heavy brake pedal pressure needed to stop the non-servo-assisted cars.[citation needed]
The MGB initially had an extremely simple electrical system. Dash-mounted toggle switches controlled the lights, ventilation fan, and wipers with only the direction indicators being mounted on a stalk on the steering column. The ignition switch was also mounted on the dash. Like the MGA, the MGB utilized two 6-volt batteries wired in series to give a 12-volt positive earth configuration. The batteries were placed under a scuttle panel behind the seats making access difficult; the location gave great weight distribution and thus improved handling. The charging system used a Lucas dynamo. Later MGBs had considerable changes to the electrical system including the use of a single 12-volt battery, a change from positive to negative earth, safety-type toggle (rocker) switches, alternator in lieu of dynamo, additional warning lights and buzzers, and most common functions moved to steering column stalks.
From 1972 there were two different Pirelli Cinturato radial tyre sizes factory-fitted to new cars, depending on whether the car was a roadster,(155/80x14) or a GT,(165/80x14).The original tyres for the majority of MG B's were 165HR14 Pirelli Cinturato.[12] With the 1974.5 arrival of the rubber bumper cars the factory-fitted tyre size was simplified to 165/80x14 for all cars, irrespective of whether the car was a roadster or a GT, and also irrespective of the wheel type (wire or RoStyle). Later on during the rubber bumper production period, alloy wheels were introduced on several different limited edition models - with the final 1,000 LE models being the last cars to leave the factory with alloy wheels. The factory built V8s were fitted with full profile 175HR14 tyres. (Source: WikiPedia)
Don't miss your opportunity to own a piece of real British Motor Company history. [ omitted ]. [ omitted ].
Vehicle Warranty
This vehicle is "For Sale by Owner," displayed at Gateway Classic Cars, who is acting only as a Sales Agent. The Company is not making any representations as to the condition and/or the value of this vehicle. Gateway Classic Cars has not checked the condition (mechanical or structural), mileage or authenticity of this vehicle and is relying on the information provided by the seller. The company is not responsible for omissions and/or errors in advertising this vehicle and the buyer shall hold the Company harmless from all future claims arising from any representations made by the Seller. All vehicles are sold on an AS-IS, WHERE-IS basis.
OR
This Vehicle is owned by the Company, however, the Company is not making any representations as to the condition, authenticity, mileage or originality of this vehicle. The Company is not issuing any warranties, verbal or written and is not responsible for any omissions or errors in advertising. The Customer is relying solely on the previous owners information and/or its own inspection, knowledge and judgment on this vehicle. The Company is not a certified mechanic or appraiser. All vehicles are sold on an AS-IS, WHERE-IS basis
About Gateway Classic Cars of Denver
special interest vehicle?
With over Gateway Classic Cars is your premier consignment company!
Selling your car has never been easier thanks to Gateway Classic Cars. Our proven team will remove the stress of selling privately and the risks of losing money at auction. You retain ownership and title of the vehicle until we sell it! Your vehicle receives a professional photo shoot of up to 100 pictures and a 34,000 collectors around the world
special interest vehicle?
With over Gateway Classic Cars is your premier consignment company!
Selling your car has never been easier thanks to Gateway Classic Cars. Our proven team will remove the stress of selling privately and the risks of losing money at auction. You retain ownership and title of the vehicle until we sell it! Your vehicle receives a professional photo shoot of up to 100 pictures and a 34,000 collectors around the world
Contact us for more details
(303) 351-7059(303) 351-7059
Terms and Conditions
Payment Options
We accept the following payment methods:
- Cashier's Check/money order
- Cash (in person)
- Personal check (once cleared)
Vehicle Pickup & Shipping
All shipping charges are buyer's responsibility.
Finance, Warranty, Shipping question?
Call the dealer at (303) 351-7059
General Terms
AVAILABILITY: We advertise our inventory across multiple websites. It is best practice to inquire about the advertised vehicle prior to purchasing in order confirm that it was not already sold. Vehicles may be sold prior to its eBay advertising ending, and we reserve the right to end advertising/listing early or to cancel any and all bids/offers solely at our discretion and shall not be held liable for any such cancellation. In the event that a bidder has the winning bid or finalizes the buy it now price, but did not check availability and the vehicle was sold before a deposit and contracts were executed, then we are not liable nor responsible.
AS-IS WHERE-IS: All vehicles are sold on an AS-IS WHERE-IS basis. Having a third party inspection and addressing any concerns is recommended prior to purchase. It is the sole responsibility of the purchaser to verify all advertisements which shall include but not limited to options, accessories, and vehicle condition before time of sale. If the purchaser chooses to waive an inspection, the AS-IS WHERE-IS is still enforced. Any concerns will not be addressed post sale as the sale is final without cures or remedies.
PAYMENT: We require a non-refundable $1,000 deposit within 24 hours of offer being placed. A deposit is a commitment to purchase and is applied towards the purchase price. The commitment to purchase is not contingent upon inspection, financing, or any other terms or conditions.
We require full payment within 7 days of offer acceptance, unless other arrangements are agreed to in writing.
If the deposit and/or full payment are not provided within said time frame, all vehicles will be relisted and transaction will be considered null and void.
We accept wire transfer (preferred), cashier's check, personal check (vehicle shipment will be delayed until check clears), ACH, credit cards (for the agreed deposit amount only and will incur a 3% fee), and in person cash payments. We also offer vehicle financing, please inquire for details prior to making bids/offers. PayPal and American Express is not accepted.
VEHICLE RELEASE: Signed purchase packet which shall include but not limited to the purchase contract, cleared payment in full, and a copy of your driver's license will be needed before the vehicle is released.
Fees and Taxes
All finalized transactions will have additional charges if applicable which could include the following: sales tax, title fees, license & registration fees, and other additional government or licensing agency charges to register the vehicle. The purchaser is responsible for these charges.
The advertised price and winning auction bids shall include a document fee of $397.63.
All credit cards are charged a 3% convenient fee.
Also published at eBay.com
