TA22 toyota Celica 13b turbo rotary project in pieces. not rx3 ra28 rx7
Sale price: $8,200.00
make an offer
Technical specifications
| Manufacturer: | Toyota |
| Model: | Celica rx7 |
| Got questions? | Ask the Seller |
Current customer rating:
()
based on 8 votes
()based on 8 votes
Photos
Description
Here is a project all ready to go. It was a complete TA22 with ser5 13B engine. I originally spent years and built it up from a bare shell after being painted. It was fully finished, registered and complied.
I love this car but unfortunately crashed it and damaged the front of the shell. I got another shell with a good front end in order to do a cut and shut (cut the front off the red one and weld it onto the black one). There are a few panel beaters around who were willing to do it no worries.
But due to certain circumstances I no longer have the time to finish the project so I want it to go to someone who can. After the front end repair, the drive train will all bolt in, there are panels ready to be painted and all in all, it could be back on the road with a fraction of the work that it would take to start from scratch.
This package includes the following:
Black TA22 in very good condition (except from engine bay/front end damage)
Red and yellow TA22 rolling shell (pretty average condition, but good front end, very straight)
Fully rebuilt extend port ser5 13B turbo engine. (was running as non turbo) done about 5000km
6speed RX8 gearbox
carbon fibre rx8 tail shaft
custom cross member to bolt box into car
custom tailshaft spacer
Microtech ltx10 computer and x4 module
all wiring in car and coil packs
custom built exhaust system
(HPC coated headers, stainless 2.5 system with cat and muffler. Specially designed to go from engine, pass above gearbox member, change sides of car and out standard celica exhaust side, while being removable as to remove gearbox if needed. No part of exhaust hangs down. This car is 50mm lowered and still legal ride height).
13" polished jellybean wheels with tyres
very nice interior in black car
racing seats mounted with 3 point harnesses mounted
blue plate (compliance) for engine, gearbox, seats and harnesses
unpainted but straight bonnet, guards and stone tray in good nick
heaps and heaps of spares in crates
Very regretful sale, the car was and can be a real show piece.
Sorry but I will not separate any of the package. Buyer must take everything.
I can email more photos of things and pics of what the car looked like before I crashed it.
Also published at eBay.com.au
I love this car but unfortunately crashed it and damaged the front of the shell. I got another shell with a good front end in order to do a cut and shut (cut the front off the red one and weld it onto the black one). There are a few panel beaters around who were willing to do it no worries.
But due to certain circumstances I no longer have the time to finish the project so I want it to go to someone who can. After the front end repair, the drive train will all bolt in, there are panels ready to be painted and all in all, it could be back on the road with a fraction of the work that it would take to start from scratch.
This package includes the following:
Black TA22 in very good condition (except from engine bay/front end damage)
Red and yellow TA22 rolling shell (pretty average condition, but good front end, very straight)
Fully rebuilt extend port ser5 13B turbo engine. (was running as non turbo) done about 5000km
6speed RX8 gearbox
carbon fibre rx8 tail shaft
custom cross member to bolt box into car
custom tailshaft spacer
Microtech ltx10 computer and x4 module
all wiring in car and coil packs
custom built exhaust system
(HPC coated headers, stainless 2.5 system with cat and muffler. Specially designed to go from engine, pass above gearbox member, change sides of car and out standard celica exhaust side, while being removable as to remove gearbox if needed. No part of exhaust hangs down. This car is 50mm lowered and still legal ride height).
13" polished jellybean wheels with tyres
very nice interior in black car
racing seats mounted with 3 point harnesses mounted
blue plate (compliance) for engine, gearbox, seats and harnesses
unpainted but straight bonnet, guards and stone tray in good nick
heaps and heaps of spares in crates
Very regretful sale, the car was and can be a real show piece.
Sorry but I will not separate any of the package. Buyer must take everything.
I can email more photos of things and pics of what the car looked like before I crashed it.
Also published at eBay.com.au
