जब आप ड्राइविंग कर रहे होते हैं, जैसे कि मुद्दों को रोकना अचानक समस्याएं होती हैं। यदि आपकी कार रिवर्स में स्टालों में है तो आप क्या करेंगे?
सबसे महत्वपूर्ण बात यह है कि शांत रहें क्योंकि इस स्थिति के लिए कई कारण हैं, और आपको यह पता लगाना होगा कि कौन सा आपका है।
फिर, आपको पता चल जाएगा कि इस लेखन को पढ़ने के बाद आगे क्या करना है।
मेरी कार रिवर्स में स्टालों - इसका क्या मतलब है?
यदि कोई गलत हो जाता है, तो इंजन स्टाल होगा। एक स्टालिंग इंजन कई कारणों से होगा, जिसमें क्लॉग्ड ईंधन इंजेक्टर या खराब ऑक्सीजन सेंसर शामिल हैं।
स्वत: कार स्टाल
अधिकांश स्वचालित कारों में, एयरफ्लो में ऑक्सीजन के स्तर की निगरानी के लिए एक O2 सेंसर है। कभी -कभी, यह घटक क्रम से बाहर हो जाएगा या अपेक्षित रूप से काम नहीं करेगा।
इस प्रकार, वाहन को दहन प्रक्रिया के लिए उपलब्ध O2 की मात्रा का निर्धारण करने में परेशानी होगी। नतीजतन, यह इंजन स्टाल बनाता है।
मैनुअल कार स्टाल
एक और कारण यह है कि एक मैनुअल कार रिवर्स में स्टाल करना चाहती है, वह बहुत तेज या अचानक क्लचिंग के कारण है।
स्वचालित जीप स्टाल
कारण यह है कि इंजन में चिंगारी की कमी है, जो कार को सुचारू रूप से चलाने के लिए आवश्यक है।
10 कारणों और वाहन के लिए समाधान जब उल्टा होता है
The solution to this problem is to put the vehicle in gear correctly.
Guarantee the stability of your engine by using its handbrake. Then, restart your vehicle and remember to remove the handbrake prior to moving.
Clogged Fuel Filter/ Bad Fuel Filter
Fuel filters play an important role in keeping the fuel delivery system functioning effectively.
Once this maintenance component is clogged by foreign dust flakes or dirt, the fuel pressure and its flow rate will decrease, leading to your car stalling when reversing.
There is no complicated method required to deal with this problem.
First and foremost, clean the filter regularly and have proper maintenance for this component. The dust or metal flakes should be kept at bay.
After an engine oil change and when the filter gets damaged or aged, replace a new one. You can either take your vehicle to the mechanic or replace the filter by following the manufacturers guidance.
The second option is more economical, but it requires certain techniques.
Failing Ignition System
How to repair? You should first locate the malfunctioning elements in the ignition system. If they get damaged severely, replace the new ones to get rid of stalling.
Failing Oxygen Sensors
यह प्रक्रिया काफी जटिल है; इस प्रकार, आपको नए घटक को स्थापित करने के लिए पर्याप्त कौशल और अनुभव वाले पेशेवरों की ओर रुख करना चाहिए।
खराब ईंधन पंप
Make sure your vehicles fuel pump discharges at accurate pressure. Or else, a malfunctioning fuel pump can be another reason for the issue of stalling in reverse as the fuel is not delivered properly.
Once the in-tank filter of this component becomes clogged, the liquid can not flow through and is even dislodged into the fuel pump.
This abnormal flow causes damage to the pump, which results in insufficient discharge and pressure. Finally, your car dies when backing up.
The most recommended way to solve this riddle is to replace the bad fuel pump with a new one.
A new pump can guarantee adequate pressure for transferring the liquid from the tank to the engine injectors or the carburetor.
Malfunctioning Idle Control Valve
The idle engine speed is maintained when the IACV bypasses the throttle butterfly valve to monitor the airflow.
However, IACV is located in the position allowing foreign dirt, dust, and oil matters to build up inside.
The buildups prevent the valve from properly operating to control the airflow, leading to the car stalling in reverse.
In this case, you can go for a spray cleaner to clean the IACV . If this element has been damaged, dont hesitate to switch to a new one.
Remember to keep the adjusting screws untouched during the process. Or else, you may alter the ratio of air-fuel.
Transmission Fluid Line Clogging
ठंड के दौरान आपकी कार रिवर्स में रिवर्स हो जाती है क्योंकि एक ठंडी शुरुआत के दौरान, तेल कनवर्टर में जाता है, और हवा इस घटक के अंदर फंस जाती है। Thus, the system is locked up, leading to the stall.
Drivers are advised to reinstate the transmission fluid circuit of the car to the initial condition.
Meanwhile, altering the transmission oil or the malfunctioning cooler line will solve the stalling problem.
Damaged TPS Sensor
How to fix a damaged TPS sensor? Simply replace it to guarantee the input and control the throttle position directly.
Earthing Connection Problem
The issues in earthing connection would be another root of the problem that is worth your consideration.
When it comes to the corroded terminals, the earthing connection at some parts of your car will get poorer, causing numerous trouble codes.
ये कोड कुछ समय के लिए शुरू करने के बाद वाहन को स्टालिंग करते हैं या यहां तक कि आपकी कार को कुछ गंभीर परिस्थितियों में शुरू करने की अनुमति नहीं देते हैं।
Have an inspection for the problematic connection on the transmission housing or between the chassis earth point and the earth lead.
Also, clean the earth points of your vehicle to eliminate the trouble codes.
पूछे जाने वाले प्रश्न
Remember to hold the brake while stalling in the second gear to avoid serious damage. In the third gear, press your foot on the brake properly while some throttle is being applied.
How Can You Stop Stalling Your Car?
Ensure that you follow these tips safely to quickly solve the problem:
- Once your vehicle begins juddering, put down the brake and clutch to save yourself.
- If the engine cuts out, putting the handbrake on is the solution to secure the vehicle.
- Start the vehicle again.
- Find the bite and get ready to move.
- Have an all-around check on your engine, even the blind spots.
- Take off the handbrake to finish.
निष्कर्ष
Take it easy when your car stalls in reverse; however, you should apply a relevant solution in time to secure your safety and the longevity of the engine.
Consider the information above, including the causes, effects, and tips for this problem to get a better driving experience.
